Konica Minolta bizhub C220 User Manual page 62

2.10 User Box Function
% The following screen appears if the account attributes are to be changed.
% Click [User List] to select a specific user from the registered User List.
% A user name may be directly entered in the Owner Name box.
% Click [Account List] to select a specific account from the registered Account List.
% An account name may be directly entered in the Account Name box.
% If the "User Box Owner is changed." check box is not clicked, the changes made will not be validat-
ed. If the changes need to be made, make sure that the "User Box Owner is changed." check box
has been clicked.
% To change the User Box Type, click the Type pull-down menu and select the desired box type.
% Enter the User Name that has been registered through User Registration for the Owner Name.
% Enter the Account Name that has been registered through Account Registration for the Account
Name.
6
Click the "User Box Password is changed." check box and enter the User Box Password.
7
Click [OK].
% If the User Box Type is changed to [Public], set a User Box Password that meets the requirements
of the Password Rules. For details of the Password Rules, see page 1-8.
% If there is a mismatch in the User Box Passwords, a message appears that tells that there is a mis-
match in the User Box Passwords. Enter the correct User Box Password.
% If no Owner Name is entered, a message appears that tells that no Owner Names have been en-
tered. Enter the correct Owner Name.
% If a user name not registered with the machine is entered in the "Owner Name" box, a message ap-
pears that tells that the Owner Name entered in the box is illegal. Click [OK] to go back to the screen
of step 4. Perform steps 4 through 7 once again.
% If no Account Name is entered, a message appears that tells that no Account Names have been en-
tered. Enter the correct Account Name.
% If an account name not registered with the machine is entered in the "Account Name" box, a mes-
sage appears that tells that the Account Name entered in the box is illegal. Click [OK] to go back to
the screen of step 4. Perform steps 4 through 7 once again.
bizhub C360/C280/C220
2
2-47