System Auto Reset Function; Setting The System Auto Reset Function - Konica Minolta bizhub C220 User Manual

2.7

System Auto Reset Function

2.7 System Auto Reset Function
When access to the machine by the Administrator of the machine through the Administrator Settings from
the control panel is authenticated, the machine enables setting of the operation of the System Auto Reset
function.
If no operations are performed for a predetermined period of time during access to the Administrator Settings
or user mode (during setting of User Authentication) from the control panel, the System Auto Reset function
automatically causes the user to log off from the mode. Processing of a specific function, however, takes pre-
cedence over the System Auto Reset function. That is, even if a predetermined period of time elapses during
which no operations are performed, once the processing of the specific function has been started, the Sys-
tem Auto Reset function does not cause the user to log off from the mode.
The predetermined period of time, after which the System Auto Reset function is activated, can be selected
from among nine values between 1 min. and 9 min. System Auto Reset can also be set to [OFF]. If no oper-
ations are performed for 1 min. even with System Auto Reset set to [OFF], the function causes the user to log
off from the mode automatically.

Setting the System Auto Reset function

0 For the procedure to call the Administrator Settings on the display, see page 2-2.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the Administrator Settings on the display from the control panel.
2
Touch [System Settings].
3
Touch [Reset Settings].
bizhub C360/C280/C220
2
2-23