Konica Minolta bizhub C220 User Manual page 178

4.5 HDD Backup Utility
cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and then
turn on, the main power switch of the machine. If the main power switch is turned off and on, the
access lock state is canceled after the lapse of time set for [Release Time Settings]. When the main
power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If
there is no wait period between turning the main power switch off, then on again, the machine may
not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on
and off:
Turn off the sub power switch → Turn off the main power switch → Turn on the main power switch
→ Turn on the sub power switch
% Make sure that none of the general users of the machine will know the Administrator Password.
% If the Administrator Password is forgotten, it must be set again by the Service Engineer. Contact
your Technical Representative.
5
From "Backup media," select the check box of the desired media and click [Next].
6
Click [Browse] and specify the destination, in which the backup folder is to be saved.
7
Type a backup folder name that consists of 1 to 50 characters in the "Backup folder name" text box
and click [Next].
bizhub C360/C280/C220
4
4-31