Konica Minolta bizhub C220 User Manual page 138

3.4 User Box Function
<From PageScope Web Connection>
0 For the logon procedure, see page 3-2.
0 Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
1
Log on to the user operation mode through User Authentication from the PageScope Web Connection.
2
Click [Open User Box] of the Box menu.
3
Enter the User Box Number and User Box Password of the desired User Box and click [OK].
% If there is a mismatch between the User Box Number and User Box Password, a message appears
that tells that authentication has not been successful. Click [OK] and perform step 3 once again.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) or more set by the Administrator of the machine, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state. To cancel the access lock state, the Administrator of
the machine must perform the Release Setting. Contact the Administrator of the machine.
bizhub C360/C280/C220
3
3-28