Indicators <Indicators - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint IP / SoundStation
4.6.1.16.1 Platform <IP_300/>, <IP_500/>, <IP_600/> and
<IP_4000/>
In the following table, x=IP_300, IP_500, IP_600, or IP_4000 and y is the bitmap
number. Note that IP_300 parameters affect SoundPoint
IP_500 parameters affect SoundPoint
affect SoundPoint
Attribute
bitmap.x.y.name
4.6.1.17 Indicators <indicators/>
Indicators (graphic icons, animations, and LED patterns) used by the phone are
defined in this section.
Attribute
ind.idleDisplay.enabled
4.6.1.17.1 Animations <Animations/> <IP_300/>, <IP_500/>,
<IP_600/> and <IP_4000/>
This section defines bitmap animations composed of bitmap/duration couples. In the
following table, x=IP_300, IP_500, IP_600 or IP_4000, y is the animation number, z is
the step in the animation. Note that IP_300 parameters affect SoundPoint
116
®
IP
® IP 500 and 501 phones and IP_600 parameters
®
IP 600 and 601 phones.
Permitted Values Interpretation
The name of a bit- This is the name of a bitmap to be used for creating an
map to be used. animation. If the bitmap is to be downloaded from the
boot server, its name must:
1.
2.
Permitted
Values Default
0, 1 0
Copyright © 2005 Polycom, Inc.
®
IP 300 and 301 phones,
Be different from any name already in use in
sip.cfg.
Match the name of the corresponding <file-
Name>.bmp to be retrieved from the boot server.
Interpretation
If set to 1, the idle display may support pre-
sentation of a custom animation if config-
ured properly in the animation section of
sip.cfg.
Optimization
® IP 300 and