Configuration Files; Sip Configuration - Sip.cfg - Polycom SoundPoint IP 601 Administrator's Manual

Administrator Guide - SoundPoint IP / SoundStation

4.6 Configuration Files

This section is a reference for all parameters that are configurable when using the cen-
tralized provisioning installation model. It is divided into two sections:
• Application Configuration - sip.cfg
• Per-phone Configuration - phone1.cfg
Notes
In the following tables, "Null" should be interpreted as the empty string, that is, attributeName=""
when the file is viewed in a text editor.
To enter special characters in a configuration file, enter the appropriate sequence using a text editor.
See the following table.
Special Character
&
"
'
<
>

4.6.1 SIP Configuration - sip.cfg

The configuration file sip.cfg contains SIP protocol and core configuration settings
that would typically apply to an entire installation and must be set before the phones
will be operational, unless changed via the local web server interface or local menu
settings on the phone. Settings include the local port used for SIP signaling, the
address and ports of a cluster of SIP servers, and other parameters. The following sec-
tions describe each of these parameters.
70
®
IP
Required Character Sequence in Text Editor
&amp;
&quot;
&apos;
&lt;
&gt;
Copyright © 2005 Polycom, Inc.
Optimization