Table of Contents
Advertisement
Error Display
Status Screen
EXT-RECORDER
POWER ?
VIDEO FORMAT
INCORRECT
MEDIA FULL
FAN MAINTENANCE
REQUIRED
Tally Lamps
The tally lamps start blinking when the remaining space on the SDHC card is running out during recording, or when the battery
power is running low. )
Blinking Mode
Blinks slowly
(Once every second)
Blinks quickly
(4 times a second)
Alarm Sound
Alarm sound is output from the monitor speaker and [PHONES] terminal when the battery level is low.
Alarm sound is output from the monitor speaker and [PHONES] terminal when the remaining space on the SDHC card is low.
(Camera mode only)
Alarm sound is also output when an error occurs in the camera recorder.
Memo :
● [Alarm Level] in the [Others...] menu can be used to specify whether alarm sound is to be output, as well as the volume level.
(A Page 87)
Menu/Thumbnail
Screen
^
Power of the camera recorder is
turned off while the external device
connection is detected, and the same
connection cannot be detected
several seconds after power is turned
on again. (Error displays for about 7
seconds)
● Video format of the file for Clip
^
Review is different from the [Frame
& Bit Rate] setting of the camera
recorder.
● IEEE1394 input video format is
different from the [Camera
Resolution] and [Frame & Bit Rate]
settings.
● [HD/DV] terminal mode switch is
not correctly set for IEEE1394 input
signals.
● [REC] button is pressed when the
^
media in use has no remaining
space.
● Remaining space ran out during
recording.
● Usage time of the fan has
^
exceeded 9000 hours.
● Battery power is low
● Remaining recording time on SDHC card is less than 3 minutes
● SDHC card is full
● Error on the camera recorder
Status
When making use of a connected external
device, turn on the power supply on the
connected device.
Set [Camera Resolution] and [Frame & Bit
Rate] correctly. (A Page 71)
Set the [HD/DV] terminal mode switch
according to the IEEE1394 input signals
correctly.
Replace the SDHC card with a new one.
Check the fan and replace accordingly. For
more details, consult your nearest JVC
dealer.
Memo :
● You can check the usage time of the fan at
Remaining Battery Power/SDHC Card Space
Action
[Others...]B[System Information]B[Fan
Hour]. (A Page 88)
Advertisement
Table of Contents
