Page 1
GUIDEBOOK HARD DISK CAMERA GZ-HD320 GZ-HD300 Dear Customers Thank you for purchasing this camcorder. Before use, please read the safety information and precautions contained in pages 2 and 3 to ensure safe use of this product. For Future Reference: Enter the Model No. (located on the bottom of the camcorder) and Serial No.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Page 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
CAUTION • Be sure to use JVC battery packs. If you use any other battery packs besides JVC battery packs, safety and performance can not be guaranteed. Grip Adjustment Adjust the strap and fasten.
Date/Time Setting Open the LCD monitor to turn on the camcorder Power button LCD monitor Select [YES] within 10 seconds Slide your finger up and down on the sensor. Then touch OK. • When the message disappears, press the power button for at least 2 seconds to turn off the power, and then press it again for at least 2 seconds.
Video recording CAUTION Before recording an important scene, it is recommended to conduct a trial recording. Slide the mode switch to select Select recording mode (REC) The mode changes when you press the button. Start recording Press the START/STOP button to start recording, and press it again to stop.
Playing back Select playback mode (PLAY) The mode changes when you press the button. Select the desired file Select (Touch OK) To perform operations such as forward search or reverse search (Z p. 24) To view files on TV (Z p. 32) ...
Contents GETTING STARTED Accessories ...10 Preparing the Remote Control ... 11 Index ...12 Indications on LCD Monitor ...14 Necessary Settings before Use ...16 Charging the Battery Pack ... 16 Date/Time Setting ... 16 Language Setting ... 17 Other Settings ...18 Grip Adjustment ...
Make a backup of important recorded data It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data. Make a trial recording Before the actual recording of important data,...
GETTING STARTED Accessories AP-V20U BN-VF808U AC Adapter Battery Pack Component Cable AV Cable CR2025 RM-V751U USB Cable Remote Control Lithium Battery CD-ROM Pre-installed in the remote control. NOTE Make sure to use the provided cables for connections. Do not use any other cables.
Preparing the Remote Control A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use. Beam Effective Area Remote Sensor Effective distance: Max. 5 m (16 ft) NOTE The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.
Index NOTE • Be careful not to cover 3, 4, 5, and 6 during shooting. • The LCD monitor can rotate 270°.
Page 13
Camcorder ! Power Button # HDMI Mini Connector (Z p. 32) $ Component Connector (Z p. 32) % DISPLAY Button (Z p. 15) & Speaker ( Ventilation hole ) Zoom Lever (Z p. 22) Speaker Volume Control * SNAPSHOT Button (Z p. 21) + Touch Sensor , OK Button - MENU Button...
Indications on LCD Monitor During both Video and Still Image Recording N OV. 1 . 2 0 0 9 ! Selected Recording Mode Indicator (Z p. 29) @ : Auto Mode : Manual Mode # Effect Mode Indicator (Z p. 31) $ Tele Macro Mode Indicator (Z p.
Page 15
During Video Playback N OV. 1 . 2 0 0 9 ! Mode Indicator # Wipe/Fader Effect Indicator (Z p. 26) $ Playlist Playback Indicator (Appears when playing back a playlist.) (Z p. 44) % Quick Review Indicator (Z p. 20) &...
Necessary Settings before Use Charging the Battery Pack Close the LCD monitor to turn off the camcorder. Attach the battery pack, then connect the AC adapter. AC Adapter To AC Outlet (110V to 240V) • The power/charge lamp blinks to indicate charging has started.
Select [CLOCK SETTING]. Select the city closest to the area where you use the camcorder. Selected area is highlighted Principal city of the selected area Time difference to Select [ON] if daylight saving time is observed. Set the date and time. Change the setting by using the touch &...
Other Settings Grip Adjustment NOTE • Fasten the strap when you grip the camcorder. • When carrying the camcorder, please be careful not to drop it. Tripod Mounting Align the camcorder stud hole with the tripod stud, and the mounting socket with the screw, and then rotate the camcorder clockwise to mount it to the tripod.
Using a microSD Card The camcorder is programmed to record on the built-in hard disk when it is shipped from the factory. You can change the recording medium to microSD card. • Operations are confirmed on the following microSD cards. - Panasonic - TOSHIBA - SanDisk...
Recording Files Video Recording Slide the mode switch to select (video) mode. To stop recording Press START/STOP again. To view the last recorded scene Select while recording is paused. Selecting during playback deletes that scene. To record a still image during video ...
Still Image Recording Slide the mode switch to select (still image) mode. To view the last recorded image Select after shooting. Selecting during playback deletes that image. To change the image quality Change the settings in [IMAGE QUALITY]. (Z p.
Recording Files Zooming Preparation: • Select mode. • Select the recording mode. Zoom out W: Wide angle You can also zoom out/zoom in by selecting [W] or [T] on the LCD monitor. (On-screen zoom control) Zoom ratio (factory-preset) mode [20X / OPTICAL] [20X / OPTICAL] To change the maximum zoom ratio ...
Registering Files to Events If you select an event to register the file to before starting recording, you can find the file easily at playback. Preparation: • Select mode. • Select the recording mode. Touch MENU. Select [REGISTER EVENT]. Select the event. The selected event is displayed on the screen.
Playing Back Files Video Playback Slide the mode switch to select (video) mode. To move to the previous or next page Touch [ ] or [ ] for over a second. To play back a few seconds from the ...
Still Image Playback Slide the mode switch to select (still image) mode. To move to the previous or next page Touch [ ] or [ ] for over a second. To delete a still image Select To change the number of thumbnails ...
Playing Back Files Playback with Special Effects Wipe or fader effects Add effects at the beginning and end of videos. These effects cannot be set for still images. Preparation: • Select mode. • Select the playback mode. Touch MENU. Select [WIPE/FADER]. Select a desired effect.
File Search Function Preparation: • Select mode. • Select the playback mode. Group Index Screen You can search the desired file by the group. The group is created automatically based on recording date and time. And the contents of the group are changed when adding/deleting or editing scenes.
Playing Back Files Event Screen You can search the desired file by the event that you registered the file to when recording. (Z p. 23) After searching by the event, you can search by the recording date to narrow down the search.
Manual Recording Manual recording mode enables you to set the focus and screen brightness, etc. manually. Changing to Manual Recording Mode Preparation: • Select mode. • Select the recording mode. Select [A/M] twice. To return to the auto recording mode ...
Page 30
Manual Recording Menus SCENE SELECT Adjusts the exposure and shutter speed to suit your surroundings or the subject. N FOCUS Adjusts the focus. FOCUS ASSIST Assists you to adjust the focus. ADJUST BRIGHTNESS Adjusts the brightness. SHUTTER SPEED A fast shutter speed can freeze the motion of a fast-moving subject, and a slow shutter speed can blur the subject to...
Page 31
Menus Adjusts the white balance to achieve the optimum colors for the amount of light in your surroundings during recording. - BACKLIGHT COMP. Backlight compensation brightens the subject by increasing the exposure. PHOTOMETRY AREA Enables you to adjust the brightness in the desired spot when backlight compensation does not work well.
Viewing Files on TV This camcorder is designed to be used with high-definition or NTSC-type color television signals. It cannot be used with a television of a different standard. Connection with TV You can output videos from the HDMI connector, COMPONENT connector, or AV connector.
To connect using the AV connector DC Connector AC Adapter AV Cable To AC Outlet AV Input Connector NOTE Change the settings in [VIDEO OUTPUT] to suit the screen size of your television. (Z p. 67) Playback Operation After the connection with TV is completed AV Connector Turn on the camcorder and the TV.
Operating in Conjunction with TV via HDMI Connecting the camcorder to an HDMI-CEC- enabled TV using the HDMI cable allows you to utilize the following convenient functions. • HDMI-CEC (Consumer Electronics Control) is an industry standard that enables interoperability between HDMI-CEC compliant devices that are connected via HDMI cables.
Managing Files CAUTION Do not remove the recording medium or perform any other operation (such as turning off the power) while accessing files. Also, be sure to use the provided AC adapter, as the data on the recording medium may be corrupted if the battery becomes exhausted during operation.
Page 36
Managing Files Deleting Selected Files After performing steps 1-2 (Z p. 35) Select [FILE SELECT]. Select the desired file and select • mark appears on the file. To select other files, repeat this step. • To check the content of the file, select [CHECK].
Protecting Files Preparation: • Select mode. • Select the playback mode. Touch MENU. Select [EDIT]. Select [PROTECT/CANCEL]. Protecting the Currently Displayed File After performing steps 1-3 Select [CURRENT]. Select [YES]. You can select the previous or next file by selecting % or &. To quit the screen ...
Managing Files Protecting All Files After performing steps 1-3 (Z p. 37) Select [PROTECT ALL]. Select [YES]. To quit the screen Select [QUIT]. To release protection of all files 1) In step 4, select [CANCEL ALL]. 2) Select [YES]. (Continued) Viewing File Information Preparation:...
Changing the Event Registration Preparation: • Select mode. • Select the playback mode. Touch MENU. Select [EDIT]. Select [CHANGE EVENT REG.]. Changing the Event of the Currently Displayed File After performing steps 1-3 Select [CURRENT]. Select [YES]. You can select the previous or next file by selecting % or &.
Managing Files Dividing Files You can divide a selected video into two. Preparation: • Select mode. • Select the playback mode. Touch MENU. Select [EDIT]. Select [DIVIDE]. Select the desired file. Playback starts. Select [SET] at the point you want to divide the file.
Trimming Files You can select the necessary part of the video and save it as a new video file. Preparation: • Select mode. • Select the playback mode. Touch MENU. Select [EDIT]. Select [TRIMMING]. Select the desired file. Select [SET] at the start point. It is recommended to select [SET] after the pause button is pressed.
Managing Files Face Detection Zoom You can enlarge the part including a face in a still image and save it as a new file. Preparation: • Select mode. • Select the playback mode. Select the desired still image. Select Touch the touch sensor to select the face to zoom.
Playlists It is a list that enables you to organize recorded videos in order of preference. Preparation: • Select mode. • Select the playback mode. Creating Playlists Touch MENU. Select [EDIT PLAYLIST]. Select [NEW LIST]. Select an item and display files. •...
Playlists (Continued) Creating Playlists Including Picture Titles You can easily create a playlist including a picture title. Press TITLE. Select the desired picture title. You can check the picture title in full-screen by selecting [CHECK]. Select the desired file. You can check the scene by selecting [CHECK].
Other Operations of Playlists You can perform additional editing and delete files in a created playlist. Adding/Deleting Files in Playlist After performing steps 1-2 (Z p. 43) Select [EDIT]. Select the playlist you want to edit. To add or delete files, follow the steps 5 to 8.
VCR/DVD recorder. NOTE • It is recommended to use the JVC DVD burner (CU-VD50/CU-VD3). When using CU-VD20 or CU-VD40, the recording time may take approx. 2 times longer than the time that is described in the instruction manual of DVD burner.
DVD burner. • When connecting to a BD burner, use a USB cable with Mini-A(Male) to B(Male) connectors. JVC’s QAM0852-001 (optional) is recommended. Refer to page 58 for details. USB Connector USB Cable BD/DVD Burner...
Page 48
Copying Files Backup All Files Preparation: • Select mode. • Select HDD or microSD card. • Connect the camcorder to the BD/DVD burner. • When using a BD burner, select [CHANGE REC. MEDIA] and select the disc type. Select [CREATE FROM ALL] ( mode) or [SAVE ALL] ( Select the desired menu.
Page 49
Selecting Files for Backup Preparation: • Select mode. • Select HDD or microSD card. • Connect the camcorder to the BD/DVD burner. • When using a BD burner, select [CHANGE REC. MEDIA] and select the disc type. Select [SELECT AND CREATE] ( mode) or [SELECT AND SAVE] ( mode).
Page 50
Copying Files To check whether the disc was created properly In step 1, select [PLAYBACK]. To play back the created disc using the camcorder 1) Connect the camcorder to the BD/DVD burner. 2) Turn on the camcorder first, then turn on the BD/DVD burner.
• When connecting to a Seagate’s FreeAgent™ Desk series product, use a USB cable with Mini-A(Male) to Mini-B(Male) connectors. JVC’s QAM0852-001 (optional) is recommended. Refer to page 58 for details. • When connecting to a Design by Neil Poulton series product, use a USB cable with Mini-A(Male) to B(Male) connectors.
Page 52
Copying Files To play back the files in the USB external hard disk drive 1) In step 1, select [PLAYBACK]. 2) Select the desired folder. 3) Select the desired file. To return to the previous screen, select @. To format the USB external hard disk ...
Dubbing Files to a VCR/DVD Recorder Preparation: • Create a playlist. • Turn off all units. To connect using the AV connectors (analog dubbing) DC Connector AC Adapter AV Cable To AC Outlet VCR/DVD Recorder AV Connector Open the LCD monitor to turn on the camcorder.
Creating a Disc Using a PC You can copy the data from the camcorder and create a disc using a PC. Installing the software to the PC System Requirements Windows Vista Windows Vista ® Home Basic (SP1) Home Premium (SP1) (32-bit, pre-installed) CPU: Intel Core...
Page 55
Making Backup on the PC Preparation: • Install the software to the PC. • Make sure that enough free space is left in the PC’s HDD. • Close the LCD monitor to turn off the camcorder. USB Cable Open the LCD monitor to turn on the camcorder.
Page 56
Creating a Disc Using a PC Making User Lists to Arrange the Files You can make a user list of a certain subject (such as Travel, Athletic meet) and put the files related to the subject into the user list. Preparation: Make backup on the PC.
Page 57
Copying Files to a disc Everio MediaBrowser supports 3 disc formats. Select the one that suits your purpose. DVD-Video Suitable if you will give the disc disc: to your friends and relatives. AVCHD disc: Suitable for high quality video. Suitable for high quality video with long recording time.
Use of this software is authorized according to the terms of the software license. When contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide Service Network at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have the following information ready.
Using with a Portable Media Player Turning on the Export Mode You can easily transfer videos recorded in export mode to iTunes . All the files with the ® export setting turned on are transferred to PC. For details on transferring, refer to the operation guide of MediaBrowser in the CD-ROM.
Using with a Portable Media Player Transferring the Files to PC Preparation: Install iTunes on a PC. ® http://www.apple.com/itunes/ Connect the camcorder to the PC with the USB cable. Select [EXPORT TO LIBRARY]. All the files with the export setting turned on are transferred to PC.
Uploading Files to Websites Turning on the Upload Mode You can upload the file to video sharing websites (YouTube™) quickly after recording. Preparation: • Select mode. • Select the recording mode. Press UPLOAD twice. If you record a file with the upload mode set on, the recording stops automatically 10 minutes after the recording is started.
Uploading Files to Websites Select [CAPTURE TRIMMED FILE]. To set the start/end point again, select [REDEFINE AREA]. Select [YES]. When copying is finished, the copied file is added to the index screen. To quit the screen Select [QUIT]. (Continued) Uploading Files For details on uploading files, refer to the operation guide of MediaBrowser in the...
Changing the Menu Settings Touch MENU. Select the desired menu. Select the desired setting. Mode Menus MANUAL SETTING LIGHT REGISTER EVENT SELF-TIMER Starts recording when the set time elapses after SNAPSHOT is pressed. SHUTTER MODE Records still images continuously while SNAPSHOT is pressed.
Page 64
Changing the Menu Settings Mode Menus VIDEO QUALITY Sets the video quality. IMAGE SIZE Selects the image size for still images. IMAGE QUALITY Sets the image quality. ZOOM Sets the maximum zoom ratio. Compensates for hand shake. GAIN UP Makes the subject appear bright automatically when you record in dark places.
Page 65
Menus DISPLAY SETTINGS LANGUAGE Sets the display language. CLOCK ADJUST Sets the time. DATE DISPLAY STYLE Sets the date and time display format. MONITOR BRIGHT Sets the brightness of the LCD monitor. MONITOR BACKLIGHT Enables you to adjust the brightness of backlight on the monitor.
Page 66
DVD is finalized automatically even if the setting is [OFF]. YES: Performs this function. [NO]: Cancels this function. NOTE Information about obtaining system update will be made available on the JVC’s web site. YES: Performs this function. [NO]: Returns to the menu screen without executing reset.
Page 67
Menus CONNECTION SETTINGS DISPLAY ON TV Displays camcorder’s on-screen display on a TV screen. VIDEO OUTPUT Sets the aspect (16:9/4:3) to the screen of the connected television when outputting videos from the AV connector. COMPONENT OUTPUT Sets the definition of the video output from the COMPONENT connector.
Page 68
Changing the Menu Settings Menus MEDIA SETTINGS REC MEDIA FOR IMAGE Sets the recording medium for still images. REC MEDIA FOR VIDEO Sets the recording medium for video. FORMAT HDD Ensures stable speeds and operation when accessing the HDD. FORMAT SD CARD You have to format newly purchased microSD cards with this camcorder before using them.
Before requesting service, consult the following chart. If the solutions indicated in the chart do not solve the problem, consult your nearest JVC dealer or JVC service center for instructions. Refer also to the FAQ of new products on JVC’s website.
Page 70
Troubleshooting Trouble Recording cannot be performed. Vertical lines appear on recorded images. Recording stops by itself. The recorded subject is too dark. The recorded subject is too bright. Digital zoom does not work. The focus is not adjusted automatically. The color looks strange. (Too bluish, too reddish, etc) White balance setting...
Page 71
Trouble Sound or video are interrupted. Cannot find a recorded video. Some functions cannot be used when playing back a backup BD/DVD through a BD/DVD burner connected to the camcorder. The color of images looks strange. The camcorder operates slowly when switching between video mode and still image mode, or when switching the...
Page 72
If a malfunction occurs in the HDD ! P erform [FORMAT HDD]. (All data is deleted.) # If this does not solve the problem, contact the JVC customer service for repairs. To reset the camcorder when it does not operate normally ...
Set the clock. If the message still appears after setting the clock, the battery for the clock has been depleted. Consult your nearest JVC dealer. • Be sure to use JVC battery packs. • Set [REC MEDIA FOR VIDEO] to [HDD]. •...
Page 74
Warning Indications Indication VIDEO MANAGEMENT FILE IS DAMAGED, RECOVERY IS REQUIRED TO RECORD/PLAYBACK, RECOVER? UNSUPPORTED FILE! THIS FILE IS PROTECTED INSUFFICIENT SPACE NUMBER OF FOLDERS OVERFLOW UPPER LIMIT OF RECORDABLE NUMBER OF FOLDERS/ FILES HAS BEEN REACHED SCENE QUANTITY LIMIT EXCEEDED PLAYLIST QUANTITY EXCEEDS LIMIT NO REGISTERED SCENES...
Indication DVD-R DISC HAS BEEN ALREADY USED FINALIZATION FAILED NO FILES Cleaning Before cleaning, turn off the camcorder and remove the battery pack and AC adapter. To clean the camcorder Wipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth into diluted mild soap and wring it out well.
Specifications General Power supply DC 11 V (Using AC adapter) DC 7.2 V (Using battery pack) Power consumption Approx. 3.5 W* * When the LED light is off and the monitor backlight is set to [STANDARD] mode. Rated Current Consumption: 1A Dimensions (W x H x D) 53 mm x 68 mm x 113 mm (2-1/8"...
Page 77
Approximate recordable time (for video) Recording medium Quality Approximate number of images (for still image) The HDD can record up to 9999 still images in either mode. Recording medium Image size/Quality 1920 x 1080 / FINE 1920 x 1080 / STANDARD 1440 x 1080 / FINE 1440 x 1080 / STANDARD 640 x 480 / FINE...
AC wall outlet other than American National Standard C73 series type use an AC plug adapter, called a “Siemens Plug”, as shown. For this AC plug adapter, consult your nearest JVC dealer. Battery Pack The supplied battery pack is a lithium-ion battery. Before using...
Page 79
Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
1 COPYRIGHT; OWNERSHIP You acknowledge that all copyrights and other intellectual property rights in the Program are owned by JVC and its licensor, and remain vested in JVC and such licensor. The Program is protected under the copyright law of Japan and other countries, and related Conventions.
Page 81
Should You breach any provision of this Agreement, JVC may terminate this Agreement without giving any notice to You. In this event, JVC may claim against You for any damages caused by Your breach. Should this Agreement be terminated, You must...