JVC HM700U - Camcorder - 1080p Instruction Manual page 96

Status Screen
Status Screen in Camera
Mode (continued)
STATUS 1 Screen
A
1280x720 30/24 fps
B
60p HQ
C
OK
A
100min
D
100min
B
STBY
282min
E
* 0
Item
A
Resolution
B
Frame Rate/Bit Rate
C
OK Mark
D
Remaining Space on
Media
E
Voltage/Battery
Power
F
Audio Level Meter
0 0 : 0 0 : 0 0 : 0 0
DD
20 min
MAX 123%
MIN 45%
SKIN AREA
S.DTL
B -3
ND1/16 A<3200K>
F5.6 AE+1 9dB 1/10000
F G
Displays the video image resolution.
(1920 1080, 1440 1080, 1280 720)
Displays the frame rate and bit rate in pairs.
(60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p HQ, 24p
SP)
Appears when an OK mark is added. (A Page 64)
Displays the remaining recording time of the SDHC cards in Slot A and Slot B separately.
Memo :
● Only warnings are displayed in the STATUS 0 and STATUS 4 Screens. (When the total remaining time for the
SDHC cards in slot A and slot B is less than 3 minutes)
A : Currently selected slot. (White card)
! : SDHC card requires restoring or formatting, or SDHC card is not supported (not of class 6 type).
A
: Write-protect switch of SDHC card is set.
A
Displays the current status of the power supply in use.
Display
12.3V
12.3V
200min
30%
RES
-20 dB -10 dB
* 0 : Same as STATUS 0 Screen (A Page 90)
J
I
H
* 0
Description
Currently powered by an AC adapter. The current voltage is shown on the right.
If the supplied voltage from the AC adapter is low, the voltage value will be
displayed in red as a warning.
Currently powered by a battery.
When the battery power runs out, the battery mark appears hollow, and RES is
displayed.
The display on the right can be set using [Battery Info] of [Status Display...] in the
[LCD/VF] menu. (A Page 85)
Displays the audio level for CH-1 and CH-2.
When [Rec Mode] in the [Rec Mode] menu is set to Variable Frame , audio cannot
be recorded and is indicated by the
The positions of -20 dB and -10 dB are displayed as
Memo :
● You can turn ON/OFF the display using [Audio Meter] of [Status Display...] in the
[LCD/VF] menu. (A Page 85)
Description
mark.
o
.