JVC HM700U - Camcorder - 1080p Instruction Manual page 64

Playback
Playing Back Recorded
Clips (continued)
Thumbnail Screen (continued)
Detailed Properties (4x1 Thumbnails)
Screen
A
B
C
Name
A
Cursor Indicates the selected clip. Use the cross-
shaped button (HI) to move the cursor.
After power is turned on and SDHC card is
inserted, or when the camera recorder is
switched to Media mode (SD Card mode),
the cursor is positioned on top of the latest
clip.
When the camera recorder changes to the
thumbnail screen during playback, the cursor
is positioned on the clip that was played
back. If you play back the same clip again, it
will continue from where it was left off.
The default position of the cursor when
SDHC card slot is switched is on the
previously selected clip before the switch.
Example of the moving order of the cursor
(total 6 clips)
B
Scroll Bar Indicates the scroll position.
When there is a black space on the right of
the scroll bar (white), this indicates further
pages.
When the scroll bar (white) is at the right end,
this indicates the last page.
D
Description
Scrolls page
Name
C
Detailed Shows the detailed properties of the selected
clip. The following information is displayed.
Properties
File Format
Clip Name
Resolution
Frame Rate
Bit Rate
Audio
Start TC
End TC
Duration
UB
Creation Date : Date created
Variable Frame : Variable frame (only in
D
Operation
Guide for the current operation buttons.
Guide
Moves the clip cursor to the left/right.
Plays back the selected clip.
Appends an OK mark to the selected clip.
This is displayed when an OK mark is not
appended to the clip. (A Page 64)
Memo :
● This is disabled when the SDHC card is
locked. (Displayed in gray)
Deletes the OK mark from the selected clip.
This is displayed when an OK mark is
appended to the clip. (A Page 65)
Memo :
● This is disabled when the SDHC card is
locked. (Displayed in gray)
Deletes the selected clip.
(A Page 62)
Description
: File format
: Clip name
: Image size
: Frame rate
: Bit rate
: Audio format
: Time code at the start of
recording
: Time code at the end of
recording
: Clip length
: User's bit
Variable Frame REC)