Table of Contents
Advertisement
Enlarged Status Display on
LCD Monitor
You can enlarge and display only the characters of the status screen on the LCD monitor.
CH1
A
CH2
B
DF
FREE
C
STBY
A
D
123 min
B
E
Item
A
Audio Level Meter
B
Framing Mode
C
Time Code Generator
D
Media Status
E
Remaining Space on
Media
F
OK Mark
G
Video Format
H
Voltage/Battery
Power
I
Operation of External
Device
J
Time Code (TC)/
User's Bit (UB)
Memo :
● During enlarged display of the status on the LCD monitor screen, the video image remains displayed on the viewfinder.
1280 x 720
DD
min
60p HQ
100min
67.8min
OK
F
G
H
Displays the audio levels of [CH-1] and [CH-2].
If the reference audio level ( -20dB or -12dB ) is exceeded, this is displayed in yellow. The Over area is
displayed in red. 48k is the sampling frequency.
Memo :
● When [Rec Mode] in the [Rec Mode] menu is set to Variable Frame , audio cannot be recorded and is
indicated by the
mark.
Displays the framing mode.
[DF]
: Drop frame
[NDF] : Non-drop frame
Displays the operation mode of the time code. (Display: [FREE], [RECR], [REGN]) (A Page 46)
Displays the SDHC card status in characters and symbols.
----
: No card found in the selected slot
STBY
: Recording standby (recording pause)
REC
: Recording
REVIEW : Clip Review (A Page 52)
STBYP : Pre Rec recording standby (A Page 54)
RECP
: Pre Rec recording (A Page 54)
STBYC : Clip Continuous recording standby
(A Page 55)
Displays the remaining recording time on the SDHC card. The currently active slot is indicated with an enlarged
black card icon with white letters. A key mark appears when the write-protect switch of the SDHC card is set.
Appears as [OK] when the currently played clip is appended with an OK mark.
Displays the video format that is set. (A Page 36)
Displays the current status of the power supply in use.
Display
Currently powered by an AC adapter. The current voltage is shown on the right.
12.3V
If the supplied voltage from the AC adapter is low, the voltage value will be displayed in
red as a warning.
Currently powered by a battery.
12.3V
When the battery power runs out, the battery mark appears hollow, and RES is displayed.
200min
Memo :
● The display on the right can be set using [Battery Info] of [Status Display...] in the [LCD/
30%
VF] menu. (A Page 85)
RES
Displays the operating status of the connected external device.
For details, refer to the instruction manual of the corresponding external device.
Displays the time code (hour:minute:second:frame) or user's bit data.
0 0 : 0 0 : 0 0 : 0 0
J
STBY
STOP
I
Description
Colon (:) for non-drop frames
Dot (.) for drop frames
REC
REVIEW
RECC
: Clip Continuous recording (A Page 55)
STBYC (displayed in red)
: Clip Continuous recording pause
(A Page 55)
STOP
: Unable to record to the card in the slot
POFF
: Power OFF
Description
Advertisement
Table of Contents
