Table of Contents
Advertisement
Preparations
SDHC Cards (continued)
Switching SDHC cards
When both card slots are inserted with SDHC cards, you can
use the [SLOT SELECT] button to switch the card to use.
When the memory on an SDHC card is full during recording,
data recording automatically switches to the other card.
Cross-Shaped
Button
Set Button
[CANCEL] Button
Note :
● The [SLOT SELECT] button is disabled during recording or
playback. Cards will not be switched even if you press the
button.
Formatting (Initializing) SDHC Cards
When the following cards are inserted, Formatting
Required appears. Format the card using the camera
recorder menu.
● Unformatted SDHC cards
● SDHC cards formatted under different specifications
* For details of the menu operation, see [Basic Operations in
Menu Screen] (A Page 66 ).
Note :
● Be sure to format the SDHC card on this camera recorder.
SDHC cards formatted on a PC and other peripheral
equipment cannot be used on this camera recorder.
Memo :
● To cancel the message display, press the [CANCEL] button.
A [!] mark appears at the remaining media display area
when an SDHC card that requires formatting is inserted.
1
Select [Format Media] in the [Media...] menu.
(A Page 89)
[SLOT SELECT] Button
2
Select the slot of the SDHC card to be formatted and
press the Set button.
3
The status of the selected SDHC card appears.
4
Select [Format] and press the Set button.
5
Formatting starts.
6
Formatting is complete.
Complete appears when formatting is complete.
Memo :
● If you do not want to format the card, select [Cancel] or
press the [CANCEL] button to return to the previous screen.
● If you remove the SDHC card during formatting, Format
Error! appears and the camera recorder returns to the
previous screen.
● During formatting, menu operation is unavailable but you can
start recording. However, this is only available when a
recordable SDHC card is inserted in the other slot.
● Formatting cannot be performed in the following cases.
● Recording is in progress on the SDHC card to be
formatted.
● SDHC card is not inserted.
● Write-protect switch of the SDHC card is set
(
is displayed).
Note :
● If you format the SDHC card, all data recorded on the card,
including video data and setup files, will be deleted.
2
4
Advertisement
Table of Contents
