Switching The Input Mode; Adjusting The Volume; Displaying The Black Screen And Turning Off The Sound Temporarily - Eiki EIP-200 Owner's Manual

Image Projection (Continued)

Switching the Input Mode

Select the appropriate input mode for
the connected equipment.
PressC INPUT
DINPUT 3 or EINPUT 4 on the remote
control to select the input mode.
• When pressing INPUT (P/R) on the projector,
input mode switches in the following order:
INPUT1 INPUT2
• When "Auto Search" is set to "On", INPUT (P/
R) on the projector functions as the Auto Search
buttons. (See page 43.)

Adjusting the Volume

Press K/L on the remote control or
–O/Q+ on the projector to adjust the vol-
ume.
Note
• Pressing K/–O will lower the volume.
• Pressing L/Q+ will raise the volume.
• When the projector is connected to external
equipment, the volume level of the external equip-
ment changes in accordance with the volume
level of the projector. Set the projector's volume
to the lowest level when turning the projector on/
off or changing the input signal.
• When you do not want to output the sound from
the projector's speaker while the projector is con-
nected to external equipment, set "Speaker" in
"PRJ-ADJ" menu to "Off". (See page 43.)
Displaying the Black Screen
and Turning off the Sound
Temporarily
Press MAV MUTE on the remote con-
trol to temporarily display a black
screen and turn off the sound.
Note
• Pressing MAV MUTE again will turn the projected
image back on.
30
C INPUT
1, 2,
INPUT3 INPUT4 .
On-screen Display
On-screen Display
AV MUTE button
Volume buttons
INPUT
buttons