Image Projection; Switching The Input Mode - Eiki EIP-1500T Owner's Manual

Image Projection

Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
Press , , ,
the remote control to select the input
mode.
• • • • • When pressing on the projector, input mode
switches in order of :
INPUT 1 INPUT 2
DIGITAL INPUT 5
Note
• When no signal is received, "NO SIGNAL"
will be displayed. When a signal that the
projector is not preset to receive is received,
"NOT REG." will be displayed.
• The INPUT mode is not displayed when
"OSD Display" of the "Options" menu is set
to " (OFF)". (See page 47.)
About the INPUT mode
INPUT 1 Used for projecting images
(Component) from equipment connected
to INPUT 1 terminal.
INPUT 2 Used for projecting images
(Component) from equipment connected
to INPUT 2 terminal.
INPUT 3 Used for projecting images
(S-Video) from equipment connected
to INPUT 3 terminal.
INPUT 4 Used for projecting images
(Video) from equipment connected
to INPUT 4 terminal.
Used for projecting
INPUT 5
images from equipment
(Component/
connected to INPUT 5
RGB)
terminal.
Used for projecting
DIGITAL
images from equipment
with DVI or RGB output
terminal connected to
INPUT 5 terminal.
, or on
INPUT 3
INPUT 4
INPUT 1, 2, 3, 4, 5 and
DIGITAL INPUT button
"On-screen Display of INPUT Mode (Example)
INPUT 1 mode
Using
Component
INPUT 2 mode
Using
Component
INPUT 3 mode
Using S-Video
INPUT 4 mode
Using Video
INPUT 5 mode
Component
RGB
• When switching the component and RGB
input mode, press
control or select "Signal Type" in the
"Options" menu.
DIGITAL mode
on the remote
29