Quick Start - Eiki EIP-200 Owner's Manual

Quick Start

This section shows the basic operation (projector connecting with the computer). For details, see
the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
1. Place the projector facing a wall or a screen
2. Connect the projector to the computer and plug the power cord
into the AC socket of the projector
When connecting equipment other than the computer, see
pages 24 and 25.
3. Remove the lens cap and turn the projector on
16
3
STANDBY-ON
8
button
INPUT button
6
4
ENTER button
Adjustment buttons
7
(P/R/O/Q)
KEYSTONE
7
button
4
Focus ring
HEIGHT
4
ADJUST lever
On the projector On the remote control
8 STANDBY button
3
ON button
7
KEYSTONE button
4
ENTER button
Adjustment buttons
7
(P/R/O/Q)
6 INPUT 1 button
_P. 18
_PP. 21–26
_P. 27