Setting Up The Projector; Standard Setup (Front Projection); Ceiling-Mount Setup - Eiki EIP-200 Owner's Manual

Setting up the Projector

Setting up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector's feet
flat and level. Doing so will eliminate the need for Keystone correction and provide the best image
quality. (See page 31.)

Standard Setup (Front Projection)

I Place the projector at the required distance from the screen according
to the desired picture size. (See page 20.)
Example of standard setup
Side View
Screen
H
Note
• Refer to page 20

Ceiling-mount Setup

I It is recommended that you use the optional
EIKI ceiling-mount bracket for this installation.
Before mounting the projector, contact your
nearest EIKI Authorized Dealer or Service
Center to obtain the recommended ceiling-
mount bracket (sold separately).
I Invert the image by setting "Ceiling + Front"
in "PRJ Mode". See page
function.
18
Lens center
L
for additional information concerning "Screen Size and Projection Distance".
42 for use of this