Adjusting The Projector Function ("Prj - Adj" Menu); Auto Search Function; Auto Sync (Auto Sync Adjustment); Auto Power Off Function - Eiki EIP-200 Owner's Manual

Adjusting the Projector Function ("PRJ - ADJ" menu)

1 Auto Search Function

1 1
1 1
This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.
Note
When "Auto Search" is set to "On"
• If two or more input signals are found, the pro-
jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projec-
tor.
• While "Auto Search" is set to "On", press
C INPUT 1,C INPUT 2, D INPUT 3 or
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.
2 Auto Sync (Auto Sync
2 2 2 2
Adjustment)
Selectable items Description
On Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.
Auto Sync adjustment is not
Off
automatically performed.
Note
• Auto Sync adjustment is also performed by
pressing F AUTO SYNC on the remote con-
trol.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual ad-
justments. (See page 46.)
Picture SCR - ADJ PRJ - ADJ
Auto Search
Auto Sync
Auto Power Off
System Sound
Speaker
RS-232C
Fan Mode
System Lock
Lamp Timer(Life)
SEL./ADJ. ENTER
Selectable
On
Off
• When the Auto Power Off function is set to
Selectable
On
Off
Selectable
On
Off
Menu operation n Page
Help
On
On
On
On
On
9600 bps
Normal
0 h 100%
END
3 Auto Power Off
3 3
3 3
Function
items
When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
disabled.
Note
"On", 5 minutes before the projector enters
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
4 Setting the Confirmation
4 4 4 4
Sound (System Sound)
items
A confirmation sound is made when
the projector turns on/off.
No confirmation sound is made.

5 Speaker Setting

5 5
5 5
items
The audio signal is output from the
internal speaker.
The audio signal is not output from the
internal speaker.
37
Description
Description
Description
43