Standby Mode Instruction - Eiki EK-121W Service Manual

Standby mode instruction

The projector has three kinds of standby mode, namely Eco.mode, Normal mode and Network mode. In the three
mode, the following functions will be limited as shown in the table.
Please switch to Standby mode on the Setting menu.
ECO. mode.........Some function will be disabled once your projector is in ECO. standby mode to reduce power
consumption. Network and RS-232C serial communication will be unavailable except the power
on command during that mode.
Normal mode ......Even in standby mode, there are no restraint on network function and serial communication function.
Network mode......In order to reduce power consumption, some functions in standby mode will be limited. Under
network standby mode, network function is not available and RS-232C serial communication
function (except boot command) is not available.
ECO
Normal
Network
х: No Control ∆: Power On command Only √: All commands are active
*х: Power On command is active with "Wake On LAN" software.
• The "Wake On LAN" software and its manual can be downloaded from EIKI global website
https://global.eiki.com/
File Name : Software_WakeOnLAN
LAN RS232C
х ∆
√ √
х ∆
*
Keypad
∆
∆
∆
-9-
Remote Controler
∆
∆
∆