Presentation Mode (Leaving The Backing Sheet Blank) - Kyocera KM-6230 Instruction Handbook Manual

Section 5 OTHER CONVENIENT FUNCTIONS

Presentation mode (leaving the backing sheet blank)

After copying onto the transparency (with the backing sheets left blank, see page 5-16), the
same original is copied onto a specified number of sheets of standard paper.
Page separation copying from two-page [open-face] originals can be used in combination
with this mode. (The asterisks in the illustration indicate the transparencies.)
1. Set the transparencies in the stack bypass tray.
POINT OF INFORMATION
• Fan out the transparencies at least once before setting them.
• Up to 25 transparencies can be loaded into the stack bypass tray at one time.
• Make sure that paper of the same size as the transparencies is loaded in one of the drawers
or decks.
2. Set the originals.
3. Touch the "Added" key.
The function select screen will appear.
4. Touch the "Presentation" key. (If that key is not displayed, touch the " " key or the " " key
until it is displayed.)
The presentation mode set-up screen will appear.
5-14