Kyocera KM-6230 Instruction Handbook Manual page 94

Section 8 COPIER MANAGEMENT
8-5
Clearing copy counts
1. Enter the copy management select mode. (See page 8-1.)
2. Touch the "Set code" key.
3. Touch the "Clear" key.
4. Touch the "Yes" key to clear all of the copy counts.
The touch panel will return to the screen for step 3.
5. Touch the "End" key.
The touch panel will return to the copy management mode set-up screen.
6. Touch the "End" key.
The touch panel will return to the basic screen.
Checking copy counts
1. Enter the copy management select mode. (See page 8-1.)
2. Touch the "Reference" key.
The numbers of copies made by each individual department will be displayed.
3. Touch the "All dept. total" key in order to view the total number of copies made on the
machine and the number of copies made for each paper size. (If the information you want
is not displayed, touch the " " key or the " " key until it is displayed.)
4. Once you have finished checking the copy counts, touch the "End" key.
The touch panel will return to the copy management mode set-up screen.
5. Touch the "End" key.
The touch panel will return to the basic screen.