Kyocera KM-6230 Instruction Handbook Manual page 144

Section 10 TROUBLESHOOTING
10-13
1. Hold down the Finisher release button and pull the Finisher away from the copier.
2. Remove the misfed paper from the coupling section without tearing it.
3. If the misfed paper cannot be removed from the coupling section, open the upper
cover.
4. Remove the misfed paper from the conveyor section.
5. Close the upper cover and reattach the Finisher to the copier.
Misfeed in the Sort tray
If "Misfeed in Finisher. Remove paper." and the misfeed location indicator shown in the
illustration appear on the touch panel, paper has misfed in the conveyor section to the
Sort tray.
1. Lift up the Non-sort tray.