If Your Pc Workstation Has A Software Problem; If You Have Forgotten Your Hardware Password - HP Kayak XW A2-U2-W2 Troubleshooting Manual

NOTE
HP Kayak XW 0480 PC Workstation — Troubleshooting Your HP PC Workstation

If Your PC Workstation Has a Software Problem

If Your PC Workstation Has a Software Problem

If You Have Forgotten Your Hardware Password

If you forget your operating system's password, refer to your operating
system's documentation for the correct recovery procedure.
If you forget the User Password and the Administrator password is set
and known:
1 Switch off the PC Workstation.
2 Restart the PC Workstation.
3 Wait for the message
4 Press to start Setup.
5 Type the Administrator password to enter Setup.
6 Select
Security
password.
7 Press to save the new User password and exit Setup.
If you forget both the Hardware User password and the Administrator
password:
1 Switch off the PC Workstation and remove the computer's cover.
2 Set switch 7 (PSWRD) on the system board switch block to ON.
3 Replace the PC Workstation's cover and switch on the
PC Workstation. Allow it to complete its startup routine.
4 Switch off the PC Workstation and remove the cover.
5 Reset switch 7 (PSWRD) to OFF.
6 Replace the computer's cover.
7 Switch on the PC Workstation and allow it to startup.
8 Press when prompted to use Setup.
9 Set new User and Administrator passwords.
10 Press to save the new passwords and exit Setup.
18 English
Setup
, the submenu, and set a new User
User Password
.