Port Redirect Function Screen - Cabletron Systems 9E106-06 Reference Manual

Local management appendix

Hide thumbs Also See for 9E106-06:

Table of Contents

Port Redirect Function Screen

The 9E106-06 Port Redirect Function Screen (Figure 2),, allows you to set each one

of the ports as a source or destination port. You can set a port to have one or more

destination ports. For example, you can set port 1 as a source port with three

destinations: ports 2, 3, and 4. Trafﬁc from port 1 is then automatically redirected

to ports 2, 3, and 4. Port 1 can also serve as a destination port for other ports.

There can be more than one Port Redirect Function screen depending on the

number of port redirect entries. Each screen displays up to 10 port redirect entries.

If there is more than one screen of redirect entries, the NEXT and/or PREVIOUS

command is displayed at the bottom of the screen, allowing you to navigate to

either the next or previous screen.

For example, with three screens of entries, the NEXT command displays at the

bottom of the ﬁrst screen. In the second screen, the NEXT and PREVIOUS

commands are displayed. In the last screen, only the PREVIOUS command is

displayed.

Module Name: 9E106-06

Slot Number: 5

SAVE

SmartSwitch 9000

Port Redirect Function

Source Port

Source Port [ 1]

Destination Port [ 1]

Figure 2. 9E106-06 Port Redirect Function Screen

9E106-06 Module Speciﬁc Information

LOCAL MANAGEMENT

Firmware Revision: 2.00.03

BOOTPROM Revision: 01.02.02

Destination Port

Status [ADD]

RETURN

Table of Contents

Smartswitch 9000 Smartswitch 9000 9e106-06