Front Panel View - Cabletron Systems SSR-ATM29-02 User Manual

To Start CoreWatch from within SPECTRUM:
1. Start SPECTRUM.
2. If you know the topology location for your SmartSwRtr model, proceed to that
location. Otherwise, open the Find View by choosing the View menu, selecting New
View, and then selecting Find. Select Model-Type Name and enter the SmartSwRtr
command to display all the SmartSwRtr models or select Network Address to display
a particular model.
3. Bring up the menu for the SmartSwRtr model and select CoreWatch.
This starts CoreWatch using the SmartSwRtr model's network address and community
name. For details on the window that CoreWatch opens, see the
page 28.
HP OpenView 5.x is network node management software for the Solaris and Windows NT
environments. If HP OpenView is integrated with CoreWatch, you may use HP OpenView
to start CoreWatch and recognize your SSRs. HP OpenView is automatically integrated
with CoreWatch when you install CoreWatch while the HP OpenView daemon is running.
To start CoreWatch from within HP OpenView:
1. Start HP OpenView.
2. Click a network node.
3. Select the Misc menu and then choose CoreWatch. The Login Dialog dialog box
appears.
4. Type the name or IP address and community string for the SSR. If you do not know
this information, see your network administrator
5. Click OK.
For details on the window that CoreWatch opens, see the
28.
CoreWatch offers two views of the SSR and runs in different modes that you should be
familiar with before using CoreWatch. You may also find it helpful to know how to use the
CoreWatch Toolbar before using CoreWatch. Separate discussions on each CoreWatch
view, its modes, and the CoreWatch Toolbar follow.
"Front Panel View" on
"Front Panel View" on page