Table of Contents
Advertisement
3.
Double-click the Layer-2 QoS Profiles object.
4.
From the list of Layer-2 QoS profiles that appears, click the one you want to edit.
An L2 Flow Priority Definition dialog box similar to the following appears:
5.
Change the flow's name, priority, or fields by editing the appropriate options.
The values for these options were specified when the QoS profile was created. For
more information on these options, see
page
183.
If you are creating a new flow based on an existing one, changing the flow name is
optional. This lets you define flows that have the same name but different priority and
field values.
6.
Click OK.
If you want to change which interfaces an existing IP or IPX flow applies to, modify the
flow's list of interfaces. You can change a flow's interface list by using a dialog box to add
or delete interfaces in the list, or by dragging an interface to apply a flow to that interface.
Separate discussions on each task follow.
"Creating a QoS Profile for a Layer-2 Flow" on
Advertisement
Table of Contents
