Table of Contents
Advertisement
•
Enabling or disabling DVMRP on tunnels.
Set DVMRP global parameters to enable or disable multicast routing on the SSR and to
specify whether or not the SSR performs pruning to exclude interfaces not in the shortest
path tree.
To set the SSR's DVMRP global parameters:
1.
Start Configuration Expert if you have not already done so.
2.
Open the configuration file you want to modify and then double-click that file's
Routing Configuration object.
3.
Double-click the IP Routing Configuration object.
4.
Double-click the IP Multicast Routing object. Then double-click the DVMRP Routing
object and click the DVMRP Global Parameters object.
A DVMRP Global Parameters Configuration dialog box similar to the following
appears:
5.
Specify whether you want to enable or disable DVMRP and pruning on the SSR by
selecting the appropriate options.
6.
Click OK.
Advertisement
Table of Contents
