Specifications - Panasonic AW-RP505 Operating Instructions Manual

SPECIFICATIONS

Source Voltage
Power Consumption
Preview Video Input
Genlock Input
Preview Video Output
Genlock Output
Camera Control Output
Pan/tilt Control Output
System Tally Input
Auxiliary Control Input
Switches
Controls
Multiport Hub Connecting
Cable:
Maximum cable length:
Operating temperature
12 V DC (DC jack)
12V, 0.5A
1.0 V[p-p] composite/75Ω (BNC connector)
1.0 V[p-p] black burst
75Ω loop through with auto terminator (BNC connector)
1.0 V[p-p] composite/75Ω (BNC connector)
75Ω (BNC connector)
Control signal (BNC connector)
Control signal (RJ-45 8P modular jack)
Tally signal (6 pin Terminal block)
Control signal (8 pin DIN connector)
Power ON/OFF Switch,
CAM CONT Switch, GAIN HIGH/MID/LOW Switch,
GAIN AGC/MANU Switch, SCENE FILE Switch, CONTROL Switch, LAMP Switch,
MODE BAR/CAM Switch
SHUTTER Switch, AUTO/ATW ATW Switch, AUTO/ATW A Switch,
AUTO/ATW B Switch, AWC Switch, ABC Switch, G/L PHASE ON/OFF Switch,
G/L PHASE Coarse Switch, IRIS AUTO/MANU Switch, MEMORY Switch, PRESET Switch,
DEF Switch, WIP Switch, H/F Switch, EXT Switch, ND Switch, OP Switch, SPEED Switch,
T. PED Control, G/L PHASE SC Control, G/L PHASE H Control, IRIS LEVEL Control,
ZOOM Lever, FOCUS Lever, PAN/TILT Lever
x 4 (Coaxial Cable 3 pcs., 10BASE-T straight cable 1 pc.)(In case of using G/L function)
10 m (In case of using coaxial cables 5C-2V and 10BASE-T straight cable UTP category-5)
10°C to +45°C (14°F to +113°F)
-36-