Features - Panasonic AW-RP505 Operating Instructions Manual

FEATURES

• The Multi Hybrid Control Panel AW-RP505 is combined
with the Multiport Hub (AW-HB505) to control up to five
Pan/tilt Heads (AW-PH300) and Color Video Cameras
(AW-E560). With the Control Panel AW-RP505 con-
nected to the multiport hub with three coaxial cables
(5C-2V) and a single 10BASE-T straight cable (UTP
category 5), and with the Multiport Hub connected to
each camera and pan/tilt head with three coaxial
cables (5C-2V) and a single 10BASE-T straight cable
(UTP category 5), the Control Panel performs various
kinds of control on the cameras and pan/tilt heads,
and sends and receives camera video signals and
genlock signals.
• The maximum cable length from this control panel to
the Multiport Hub is 10 meters. The maximum cable
length between the multiport hub and the cameras and
pan/tilt heads is 500 meters.
• Head pan/tilt and lenz zoom/focus can be controlled at
varying speeds with the servo control, and can be pre-
set at up to 10 points per pan/tilt head.
• With the auxiliary control input connector (AUX CON-
TROL IN), pan/tilt, zoom, focus, and iris operations can
be externally controlled.
-2-