Panasonic AW-RP505 Operating Instructions Manual page 25

• Connect the iris control cable of the motor-driven zoom
lens to the camera and the remote (zoom/focus control)
cable to the pan/tilt head. If the remote (zoom/focus
control) cable of the motor-driven zoom lens is con-
nected to the camera, the lens cannot be controlled.
Remote (Zoom/Focus
Control) Cable
ITEM UP DOWN IRIS
PAGE
(AWC) (ABC) (BAR)
G/L IN VIDEO OUT
ZOOM/FOCUS
VBS/HD
VD
75 VIDEO/RGB
ON
REMOTE
OFF
CONTROL
CAUTION
EXT DC IN
SEE MANUAL
To Lens Interface Connector
Iris Control
Cable
To Iris Connector
• Connect the control panel to the multiport hub with the
three coaxial cables (video signal, G/L signal, camera
control signal) and one 10BASE-T straight cable
(pan/tilt head control signal). The maximum distance
between the control panel and pan/tilt head is 10
meters for coaxial cables 5C-2V and 10BASE-T straight
cable (UTP category 5 or equivalent).
• Connect the pan/tilt head to the multiport hub with the
three coaxial cables (video signal, G/L signal, camera
control signal) per pan/tilt head and one 10BASE-T
straight cable (pan/tilt head control signal). The maxi-
mum distance between the control panel and pan/tilt
head is 500 meters per pan/tilt head for coaxial cables
5C-2V and 10BASE-T straight cable (UTP category 5 or
equivalent).
• For further details on connecting the individual devices,
-23-