Front Panel - Panasonic AW-RP505 Operating Instructions Manual

Front Panel

$9 Speed Switch Changing Switch
[SPEED SW CHANGE, LOW/HIGH]
Changes the polarity of SPEED Switch @9 . If ZOOM
lever #6 , FOCUS Lever #7 , or PAN/TILT Lever #8 is
moved while keeping SPEED Switch @9 depressed,
the corresponding operation takes place at low
speed, provided that SPEED SW CHANGE Switch $9
is in the LOW position.
moved with SPEED Switch @9 depressed when
SPEED SW CHANGE Switch $9 is in the HIGH posi-
tion, the corresponding operation takes place at high
speed.
The speed polarity can also be changed by pressing
MEMORY Switch @7 while keeping SPEED Switch @9
depressed. When this step is taken again, the origi-
S P E E D . S W Z O O M Z O O M / F O C U S
C H A N G E R E V E R S E E X C H A N G E
L O W H I G H N O R R E V O F F O N
If one of these levers is
T I LT PA N
F O C U S
R E V E R S E R E V E R S E
R E V E R S E
N O R R E V N O R R E V N O R R E V
nal speed polarity is restored. Take this step if it is
difficult to shift SPEED SW CHANGE Switch $9
because this control panel is mounted on a console
or the like.
%0 Zoom Reverse Switch
[ZOOM REVERSE, NORM/REV]
Changes the operating direction of ZOOM Lever #6 .
The lens zoom moves toward TELE when ZOOM
Lever #6 is moved toward TELE, or toward WIDE
when it is moved toward WIDE, provided that ZOOM
REVERSE Switch %0 is in the NOR position. When
ZOOM REVERSE Switch %0 is set to the REV posi-
tion, lens zoom operation takes place in the opposite
direction. With ZOOM REVERSE Switch %0 in the
-16-