Panasonic AW-RP505 Operating Instructions Manual page 19

REV position, the operating directions shown on the
panel are reversed. In this case, paste the supplied
seal on the panel.
%1 Zoom/Focus Exchange Switch
(ZOOM/FOCUS EXCHANGE, ON/OFF]
ZOOM Lever #6 and FOCUS Lever #7 exchange their
function between them when this switch is set to the
ON position. Unless this exchange is needed, keep
the switch in the OFF position.
With ZOOM/FOCUS EXCHANGE Switch %1 in the ON
position, the operations shown on the panel do not
agree with the indications on the panel. In this case,
paste the supplied seal on the panel.
%2 Focus Reverse Switch
[FOCUS REVERSE, NOR/REV]
Changes the operating direction of FOCUS Lever #7 .
The lens is focused far when FOCUS Lever #7 is
moved toward FAR, or near when the lever is moved
toward NEAR, provided that FOCUS REVERSE Switch
%2 is in the NOR position. When FOCUS REVERSE
Switch %2 is set to the REV position, the lens focus
operates in the opposite direction.
With FOCUS REVERSE Switch %2 in the REV position,
the operating directions shown on the panel are oppo-
site to the indications on the panel. In this case, paste
the supplied seal on the panel.
%3 Tilt Reverse Switch [TILT REVERSE, NOR/REV]
Changes the tilt direction controlled by PAN/TILT Lever
#8 . The pan/tilt head turns up when PAN/TILT Lever #8
is moved toward UP, or down when it is moved toward
DOWN, provided that TILT REVERSE Switch %3 is in
the NOR position.
opposite direction if the TILT REVERSE Switch %3 is in
the REV position.
With TILT REVERSE Switch %3 in the REV position, the
operating directions shown on the panel are opposite
to the indications on the panel. In this case, paste the
supplied seal on the panel.
%4 Pan Reverse Switch [PAN REVERSE, NOR/REV]
Changes the pan direction controlled by PAN/TILT
Lever #8 .
The pan/tilt head turns leftward when
PAN/TILT Lever #8 is moved toward LEFT, or rightward
if it moved toward RIGHT. The rotary head turns in the
opposite direction if the PAN REVERSE Switch %4 is in
the REV position, provided that PAN REVERSE Switch
%4 is in the NOR position. When PAN REVERSE Switch
is set to the REV position, the pan/tilt head turns in the
opposite directions.
With PAN REVERSE Switch %4 in the REV position, the
operating directions shown on the panel are opposite
to the indications on the panel. In this case, paste the
supplied seal on the panel.
-17-
The pan/tilt head moves in the