Recording Of One Cd Or Several Cds (Cd =Md); (Program Recording) - Kenwood XD-981MD Instruction Manual

56

Recording of one CD or several CDs (CD =MD)

(Program recording)

The desired tracks from 3 CDs can be recorded in the pro-
grammed sequence on one MD.
Recording preparation is required.
1
Check that the CD player is in the stop mode.
If it is in play mode
2
Light the "PGM" indicator.
3
Enter disc Nos. and track Nos. in the order you
want to record them.
1 Select the disc.
2 Select the track.
3 Confirm the selection.
To edit tracks from more than one CD, repeat 1 , 2 , 3 for
each CD.
4
Start edit recording.
Always remove the disc after recording.
Note Note
W
7
PGM
DISC
SELECTOR
Go to step 2
within 8 sec-
onds.
1 2 3
4 5 6
7 8 9
+10 0
PGM
O.T.E.
MD
Lights
N. B.
PGM
CD
C D 1 D I S C
EDIT
TITLE SEARCH
P G M D I S C C 3
EDIT
TITLE SEARCH
P G M D I S C C 3
Displays the entered track No.
÷ Select so that the usable recording time of the MD is not
exceeded.
÷ Up to 32 tracks can be programmed. When "FULL" is dis-
played, no more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track
No. from the beginning.
PGM
CD
0 0 1 R 5 4 : 3 2
Lights
÷ The MD recording is paused while the CD is exchanged in the tray.
÷ When the PGM key is pressed to cancel the edited contents,
the entire editing contents will be erased.
Convenient Recording Methods
XD-981MD (En)
STEREO TUNED
DIGITAL TOTAL
d - - C P P 0 1
3
:
.
STEREO TUNED
DIGITAL TOTAL
d 0 5 C P P 0 1
3
:
.
5 6 7 8
9 10 11 12
13 14 15 16
MD
VOL
DIGITAL
*0 1 8 8 0 12
:
.