Dividing A Track (Track Divide) - Kenwood XD-981MD Instruction Manual

64
Dividing a track
Use the following procedure to divide a track into two by
inserting a track number in its middle. For example, by in-
serting an additional track number before the passage you
are specially fond of, it is easy to skip to there when you
play the disc later. Note that the track numbers of the tracks
located after the divided track are automatically
incremented.
1
Play the track to be divided.
2
Press the TRACK EDIT key at the desired position.
1 Select "DIVIDE".
2 Set it.
3
Execute the track divide operation.
Up to 255 track numbers can be inserted additionally by repeat-
ing 1 to 3 for each of them.
4
After editing, eject and remove the mini disc.
(TRACK DIVIDE)
TRACK EDIT
÷ This operation is also possible during play-pause.
Each press switches the operation.
1 DIVIDE ?
2 COMBINE ?
3 ERASE ?
4 Editing cancelled
÷ Editing is aborted if no operation has been performed for 8
seconds.
EDIT
TITLE SEARCH
Q D I V I D E
EDIT
TITLE SEARCH
0 0 2 > > 0 0 3
Should be approx. 2 sec. or longer.
1 2
A B
1 2 3
A B
Divided track (second half)
Divided track (first half)
C O M P L E T E
÷ There is no blank space left between the two tracks.
÷ When the track to be split has a title, the two tracks will have
the same title.
"WRITING" displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
MD Edit Functions
XD-981MD (En)
STEREO
DIGITAL
0 0 2 C 8 0 1 2
L E ?
:
.
STEREO
DIGITAL
E ? d I S C 8 0 0 0
:
.
3
C
Track number is
incremented.
4
C
E ! 0 0 5 8 0 0 9 0
:
.
TUNED
TOTAL
TUNED
TOTAL