Kenwood XD-981MD Instruction Manual page 76

76
8
Select the timer program No. to be used.
Ensure that the unit is OFF.
Check the reservation content.
Select the program number to be
checked.
When timer operation is not required
Press so that all PROG. indicators are
OFF.
To set the same timer program again
Press so that the desired PROG. indica-
tors lights.
O.T.E.
REPEAT
O.T.E.
O.T.E.
Adjust the clock before setting the timer.
Each press of the key switches the program numbers as
follows.
1 PROG.1 ......... Execution of program 1 only.
2 PROG.2 ......... Execution of program 2 only.
3 PROG.1, 2 ..... Execution of programs 1 and 2.
4 Timer OFF
÷ The selected program No. lights.
÷ The timer will not function unless a program No. is selected.
The reservation contents cannot be cleared. The contents are
cleared only when they are changed.
Note Note
Each press of the key switches the program numbers as
follows.
1 PROG.1 ......... Display of program 1
2 PROG.2 ......... Display of program 2
3 Normal mode
÷ The reserved contents will be displayed for 3 seconds per item.
After this, the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the
beginning.
Each press of the key switches the program numbers as
follows.
1 PROG.1 ......... Program 1 operates.
2 PROG.2 ......... Program 2 operates.
3 PROG.1, 2 ..... Programs 1 and 2 operate.
4 Not lit ............ No program operates.
÷ The reservation contents are held in memory.
Each press of the key switches the program numbers as
follows.
1 PROG.1 ......... Program 1 operates.
2 PROG.2 ......... Program 2 operates.
3 PROG.1, 2 ..... Programs 1 and 2 operate.
4 Not lit ............ No program operates.
÷ Also prepare the disc or MD and adjust the listening volume.
Timer operation
XD-981MD (En)