Recording On Tape - Kenwood XD-981MD Instruction Manual

34

Recording on TAPE

0
PUSH
OPEN
2 3
REV.MODE
DOLBY NR
3 3
1. Load a tape in deck.
1 Open the door of deck.
2 insert a tape.
3 Close the door.
1 1
2. Select the tape transport direction.
To reverse the transport direction
1 Press the play key.
2 Press the play key again.
3 Stop playback.
2 2
÷ When recording is started, the tape is trans-
ported in the direction selected in this step.
÷ Wind the tape to the position where recording is
to be started.
3. Set the recording condition.
1 Select the reverse mode.
2 Select the Dolby NR mode.
3 3
Note that this cassette deck cannot record onto Metal tapes.
Note Note
¶
3 3
4 4
5 5 3 3
Let's put out some sound Let's recording
UP
0
1 1
÷ Differentiation between normal (TYPE ø) and
high (TYPE ¿) tape is set automatically.
÷ Remove tape slack before loading.
Check the tape transport
direction indicator.
Transport direction
2 3
XD-981MD (En)