Kenwood XD-981MD Instruction Manual page 67

4
After editing, eject and remove the mini disc.
Image of erasing one track
(TRACK ERASE)
Erasing a part of a track
1 Turn the part to be erased into one track by using the TRACK DIVIDE function.
2 Erase it by using the TRACK ERASE function.
Use the following procedure to erase the desired part of a track.
1 Turn the part to be erased into one
track.
Use the TRACK DIVIDE function to
turn the part you want to erase into
one track.
2 Erase the part to be erased.
Use the TRACK ERASE function to
erase the "track" (part you want to
erase) made in step 1.
3 After editing, eject and remove the
mini disc.
Track to be erased
1 2 3 4
A B C
"WRITING" displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
1 2
D A B
Track Nos. are adjusted.
Should be approx. 2 sec. or longer.
Should be approx. 2 sec. or longer.
1 2
A B
1 2
A B
The part divided with TRACK DIVIDE
becomes one "track".
÷ If it is required to erase only the first or second half of a track,
only one TRACK DIVIDE operation is enough.
1 2
A B
Execute TRACK ERASE
once.
1 2
A B
The space left after erasing is filled by sub-
sequent tracks which move along.
MD Edit Functions
XD-981MD (En)
3
D
Part to be erased
3
C
Execute TRACK
DIVIDE twice.
3 4 5
C
‰
TRACK DIVIDE
Part to be erased
3 4 5
C
Track No. is
adjusted.
3 4
C
Á
TRACK ERASE
67