Dell PowerEdge M420 User Manual page 11

For m1000e

Hide thumbs Also See for PowerEdge M420:

Table of Contents

Dell 10Gb Ethernet Pass Through II

The 10GbE PTM is listed by the system as "DELL 10GbE XAUI PTM".

10.Run the following command to connect to the 10GbE PTM CLI:

# connect Switch-3

11.Change privilege level if required. To login as an administrator, run the command

You are now connected to the 10GbE PTM and can start entering commands.

12.To show the list of available commands, run the command:

# help

Figure 11: getioinfo

Figure 12: 10GbE PTM Welcome Banner

Rev 1.00

Table of Contents