Live Dialing - AT&T SB67040 User Manual

Live Dialing

You can make a call at any time by going off hook, then dialing a phone number.
To dial a live number:
12:30PM Thu Feb 25 2010
9-1
Transfer ExtList ParkList Page
Figure 263. Entering Digits
12:30PM Thu Feb 25 2010
Graham Bell 9-1-232-555-0176
Transfer Transfer Conf Park
Figure 264. Active Call
Outgoing Calls
Synapse User's Guide
1. Do one of the following to go off hook (to hear the dial tone) from Idle mode:
Lift the corded handset.
Press SPEAKER or HEADSET.
Press an available Call Appearance key located on the right side of the display.
2. Enter the number you want to dial.
Enter the digit 9 or whatever digit, if any, that must be dialed first before
Quick
Dial
outside calls before the phone number to dial an outside number, as shown in
Figure 263.
Hyphens are automatically inserted except when whatever digit, if any, which
must be dialed before outside calls is followed by a 0 for an outgoing
international call.
When you dial more digits than can be displayed, the digits move to the left
2:51
so that the most recently dialed digits can be seen. Three dots appear to the
left of the dialed numbers to indicate that the earliest digits are no longer
visible.
The Active Call screen displays, as shown in Figure 264.
Quick
Dial
More 1/3
When the active call begins, the soft keys change to a new set of options.
To do this with the Cordless Handset, see "[Handset] Live Dialing" on page
198
203.