[Handset] Registering An Optional Cordless Handset - AT&T SB67040 User Manual

[Handset] Registering an Optional Cordless Handset

You can register only one AT&T SB67040 Cordless Handset and only one AT&T TL7600 Cordless Headset to a Deskset, and up to
five Desksets can have cordless accessories. When a Deskset has cordless accessories, they are all part of the same extension,
and only one device can be used at a time.
To register the SB67040 Cordless Handset:
Cordless Settings
1. Handset
(Not Registered)
2. Headset (Not Registered)
Press SELECT to register or
deregister the cordless device.
Use or to scroll then press
SELECT or press 1 - 2.
Figure 78. Cordless Settings
Cordless Handset Registration
Cordless Handset is currently
Not Registered.
Place Cordless Handset in charger.
Press Register to begin process.
Register
Figure 79. Handset Not Registered
Settings
Synapse User's Guide
1. Press MENU, then 2, and then 6 to display the Cordless Settings menu shown in
Figure 78.
2. Press 1 to display the Cordless Handset Registration screen shown in
Figure 79.
3. Prepare the Cordless Handset to be registered. The
Handset must be in the charger with the REGISTER
screen displayed, as shown in Figure 80. Even if the
Quick
Dial
Cordless Handset has been in its charger, remove
and replace the Cordless Handset right before you
press
It does not matter which device starts the
registration process.
Quick
Dial
Exit
on the Deskset.
90
12:00a Jan. 00 12:00a Jan. 00
REGISTER
1/3
To register Handset:
1. Go to your
Deskset.
2. Press MENU.
3. Select User
Figure 80. Handset Not
Registered