Predialing - AT&T SB67040 User Manual

Predialing

Predial is only available when the Deskset is idle or when all calls are on hold. In Predial mode, there is no dial tone. You can
only predial one phone number at a time. To begin Predial, press a dial-pad key.
To make a Predial call:
12:30PM Thu Feb 25 2010
9-1-232-555-01
To call, lif t receiv er, or press SPEAKER,
HEADSET, or key next to icon.
Transfer Store Backspc Call
Figure 261. Predial Number
12:30PM Thu Feb 25 2010
Graham Bell 9-1-232-555-0176
Transfer Transfer Conf Park
Figure 262. Active Call
Outgoing Calls
Synapse User's Guide
1. Enter the phone number (For example: 9–1–232–555–0176) using the dial pad,
as shown in Figure 261.
For outside calls, dial 9 or whatever digit, if any, that must be dialed first before
outside calls. The hyphens appear automatically.
The following options are available:
Press
Quick
Dial
Pause
Press
Press
Press CANCEL to cancel predial.
2. Lift the corded handset, or press SPEAKER, HEADSET,
Appearance key associated with the predial number to go off hook and call the
2:51
number, as shown in Figure 262.
When you are in Predial mode, the Call Appearance highlight bar does not
appear. Once the call becomes active, the highlight bar displays.
Quick
When you predial more digits than can be displayed, the digits move to the
Dial
left so that the most recently dialed digits can be seen. Three dots appear to
More 1/3
indicate that the earliest digits are no longer visible.
To do this with the Cordless Handset, see
to store the number in your Personal list.
to delete the last digit entered.
to insert a two-second pause into the phone number.
"[Handset] Predialing" on page
197
, or the Call
202.