Operation Manual - Pioneer PDP-4340HD Operating Instructions Manual

For the handling procedures and the other functions, refer to the dedicated

operation manual.

Using HDMI Input
The INPUT 1 and INPUT 3 terminals include HDMI
terminals to which digital video and audio signals can
be input. To use the HDMI terminal, activate the termi-
nal and specify the types of video and audio signals to
be received from the connected equipment. For the
types of these signals, see the operation manual that
came with the connected equipment.
Before starting the menu, press INPUT 1 (or INPUT
3) on the remote control unit or press INPUT on the
Plasma Display to select INPUT 1 (or INPUT 3).
Connecting HDMI equipment
Media Receiver (rear view)
SERVICE ONLY
I N
OUT
A ANTENNA/CABLE B
To activate the HDMI terminal:
1
Press HOME MENU.
2
Press / to select "Option", and then press
ENTER.
3
Press / to select "HDMI Input", and then press
ENTER.
4
Press / to select "Setting", and then press
ENTER.
5
Press / to select "Enable", and then press
ENTER.
2
En
PDP5040HD-UC (HDMI)
DIGITAL OUT
OPTICAL
I N OUT
CONTROL
VCR
CONTROL
INPUT 2
I N
S-VIDEO
VIDEO R-AUDIO-L VIDEO R-AUDIO-L
OUT
VIDEO R-AUDIO-L R-AUDIO-L
MONITOR OUT S-VIDEO S-VIDEO
Audio cable (commercially available)
Make this connection when inputting
analog audio signals.
2
Input signal correlation table
∗
1920 1080i@59.94/60Hz
∗
720 480p@59.94/60Hz
∗
1280 720p@59.94/60Hz
∗
720(1440) 480i@59.94/60Hz
• PC signals are out of correspondence.
(TS) DTV-ANTENNA
IN
S400
INPUT 1
COMPONENT VIDEO
Y C B /P B C R /P R
INPUT 1 INPUT 3
Y C /P C /P HDMI
INPUT 3 B B R R
HDMI cable
(commercially available)
HDMI equipment
Setting
Disable
Enable
Item Description
Disable Deactivates the HDMI terminal.
(factory default)
Enable Activates the HDMI terminal.
6
Press HOME MENU to exit the menu.
8/22/03, 10:48
AC INLET
BLACK
WHITE
SYSTEM CABLE