Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this man- ual in a safe place for future reference.
Contents Changing the viewing angle during playback Playing CDs (Multi angle) 36 Listening to a CD 49 Using the dynamic range control 37 Stopping playback 49 Introduction of advanced CD operation 50 Playing DVD video discs Repeating play 50 Watching a DVD video 38 Playing tracks in a random order 50 Operating the DVD menu 39 Scanning tracks of a CD 50...
Contents XM tuner Adjusting source levels 76 Listening to the XM 64 Using the direct control 77 Introduction of advanced XM tuner Using the Dolby Pro Logic II 77 operation 65 Setting the speaker setting 78 Switching the XM display 65 Selecting a cut off frequency 79 Storing and recalling broadcast stations 65 Adjusting the speaker output levels 79...
Contents Setting the video input 92 Setting for rear view camera 92 Setting the clock 93 Setting the automatic open function 93 Adjusting the LCD panel slide position 94 Setting the video of rear display 94 Displaying the navigation image on rear display 94 Using the AUX source 94 Switching the background display 95...
Section Precautions IMPORTANT SAFEGUARDS To ensure safe driving Please read all of these instructions regarding WARNING your display and retain them for future refer ! LIGHT GREEN LEAD AT POWER CON- ence. NECTOR IS DESIGNED TO DETECT 1 Read this manual fully and carefully be- PARKED STATUS AND MUST BE CON- fore operating your display.
Section Precautions To watch a video source such as DVD or TV on WARNING the front seat display, park your vehicle in a Do not use with vehicles that do not feature an safe place, apply the parking brake, release ACC position.
Section Before You Start Information to User CAUTION: USE OF CONTROL OR ADJUSTMENT OR Alteration or modifications carried out without PERFORMANCE OF PROCEDURES appropriate authorization may invalidate the OTHER THAN THOSE SPECIFIED HEREIN users right to operate the equipment. MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
When combined with a Pioneer navigation unit Video CD When you use this unit with the Pioneer DVD navigation unit, make sure that you use the map disc CNDV 21 or later. This manual ex plains the operations with the combined use of them.
Section Before You Start ! Route guidance of the combined Pioneer U.S.A. navigation unit cannot function properly Pioneer Electronics (USA) Inc. when some other source images are dis CUSTOMER SUPPORT DIVISION played. Guidance by voice can be obtained, P.O. Box 1760 but on guidance by display (e.g.
Section Before You Start DVD audio playback ! Manufactured under license from Dolby La It is possible to play back DVD audio. boratories. Dolby, Pro Logic, and the double D symbol are trademarks of Dolby DVD video playback Laboratories. It is possible to play back DVD video, DVD R (video mode) and DVD RW (video mode).
Section Before You Start Condition memory Note This function memorizes audio language, sub This product incorporates copyright protection title language, angle number and aspect ratio technology that is protected by method claims of made during disc playback for up to 30 discs. certain U.S.
The SAT RADIO READY mark printed on the turned off, it may drain battery power. front panel indicates that the Satellite Radio Tuner for Pioneer (aka, XM tuner and Sirius sa tellite tuner which are sold separately) can be controlled by this unit. Please inquire to your...
Section Whats What Head unit 6 ENTERTAINMENT button Press to switch between the background 1 DISPLAY button displays. Press to select different displays. 7 WIDE button 2 PGM button Press to select a desired mode for enlarging Press to operate the preprogrammed func a 4:3 picture to a 16:9 one.
Section Whats What c Joystick Move to do manual seek tuning, fast for ward, reverse and track search controls. Also used for controlling functions. d EQ button Press to select various equalizer curves. e BAND/ESC button Press to select among three FM bands and one AM band and to cancel the control mode of functions.
Section Whats What 2 3 4 Remote control 6 DIRECT button Press to do direct channel select when 1 Remote control selection switch using an XM tuner. Switch to change the setting of the remote control. For details, refer to Setting remote 7 Remote control operation mode switch control code type on page 87.
Section Whats What a BAND/ESC button l STEP (r/q) button Press to select among three FM bands and Press to move ahead one frame at a time one AM band and to cancel the control during DVD/VideoCD playback. Press and mode of functions.
Section Whats What ! 16 can perform the same operations as ! For details concerning operation, refer to the preset tuning keys P 1P 6 and the the TV tuners operation manuals. disc selection keys 0106. If you want to select a disc located at 7 % When you want to operate the follow- to 12 by using buttons 16, press and ing functions only on the rear display,...
The source names are displayed and select VIDEO (refer to page 92). able ones are highlighted. ! External unit refers to a Pioneer product (such ! DVD Built in DVD player as one available in the future) that, although...
Section Basic Operations Loading a disc Using the rear display You can watch the video sources (such as % Insert a disc into the disc loading slot. DVD or AV) on rear display independently of Playback will automatically start. front display. # If DVD AUTO PLAY is turned off, touch the ! To watch a DVD/Video CD on the rear dis source icon and then touch DVD to select DVD...
When the AV (video input) is not set to VIDEO (refer to page 92). ! When a Pioneer navigation unit is connected to this unit, the navigation image can be dis played on the rear display. (Refer to page 94.)
Section Basic Operations Operating the menu Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Operating the menu by using the joystick You can also perform most of the menu items by using the joystick.
FULL (full)JUST (just)CINEMA (cinema) long as you press ANGLE (+/) and hold. ZOOM (zoom)NORMAL (normal) # When a Pioneer navigation unit is connected to this unit, press WIDE and hold to select the de sired setting. Press and hold WIDE repeatedly to...
Section Basic Operations Adjusting the picture FULL (full) A 4:3 picture is enlarged in the horizontal direc adjustment tion only, giving you a 4:3 TV picture (normal pic You can adjust BRIGHT (brightness), ture) without any omissions. CONTRAST (contrast), COLOR (color) and JUST (just) HUE (hue) for each source and rear view cam The picture is enlarged slightly at the center and...
Section Basic Operations # With some rear view cameras, picture adjust Note ment may not be possible. The icons indicating the current ambient bright Touch c or d to adjust the selected ness used for adjusting BRIGHT and CONTRAST item. may differ from DIMMER slightly.
Section Basic Operations Attaching the front panel % Replace the front panel by holding it upright to the unit and clipping it securely into the mounting hooks.
Section Tuner Listening to the radio Touch the source icon and then touch TUNER to select the tuner. # When the source icon is not displayed, you can display it by touching the screen. Touch the screen to display the touch panel keys.
Section Tuner Introduction of advanced % When you find a frequency that you want to store in memory keep touching tuner operation one of preset tuning keys P 1P 6 until the preset number stops flashing. The number you have touched will flash in the preset number indicator and then remain lit.
Section Tuner Touch c or d to set the sensitivity. There are four levels of sensitivity for FM and two levels for AM: FM: LEVEL 1LEVEL 2LEVEL 3LEVEL 4 AM: LEVEL 1LEVEL 2 The LEVEL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
Section Playing DVD audio discs Listening to a DVD audio Touch the source icon and then touch DVD to select the DVD player. # When the source icon is not displayed, you can display it by touching the screen. # If no disc is loaded in the unit, you cannot se lect DVD (DVD player).
Section Playing DVD audio discs Skipping back or forward Notes to another group ! You can display the repeat range selected cur rently by touching DISP. % To skip back or forward to another ! If you do not use the touch panel keys within group, touch a or b.
Section Playing DVD audio discs Introduction of advanced Touch A.MENU and FUNCTION and then touch REPEAT. DVD audio operation Touch any of the following touch panel keys to select the repeat range. ! DISC Play through the current disc ! GROUP Repeat just the current group ! TRACK Repeat just the current track Note...
Section Playing DVD audio discs When you find the desired track touch Touch PAGE or PAGE + to switch still b to turn scan play off. pictures. Touching PAGE + goes to the next still picture. Touching PAGE returns to the previous still Note picture.
Section Playing DVD audio discs Slow motion playback Touch 09 to input the desired num- ber. This lets you slow down playback speed. ! To select 3, touch 3. ! This function can be operated only on the ! To select 10, touch 1 and 0 in that order. moving picture parts of DVD audio disc.
Section Playing DVD audio discs Changing audio language % Touch SUB.T during playback. Each time you touch SUB.T it switches be during playback (Multi-audio) tween subtitle languages. DVDs can provide audio playback with differ ent languages and different systems (Dolby Di Notes gital, DTS etc.).
Section Playing DVD audio discs Notes ! The mark on a DVDs package indicates it features multi angle scenes. The number in mark indicates the number of angles from which scenes were shot. ! Touching ANGLE during fast forward/fast re verse, pause or slow motion playback returns you to normal playback.
Section Playing DVD video discs Watching a DVD video 8 Audio language indicator Shows which audio language has been se lected. Touch the source icon and then touch DVD to select the DVD player. # When the source icon is not displayed, you can display it by touching the screen.
Section Playing DVD video discs Skipping back or forward # Fast forward/fast reverse may not be possible at certain locations on some discs. If this hap to another title pens, normal playback automatically resumes. % To skip back or forward to another title, touch a or b.
Section Playing DVD video discs Introduction of advanced Touch A.MENU and FUNCTION and then touch REPEAT. DVD video operation Touch any of the following touch panel keys to select the repeat range. ! DISC Play through the current disc ! TITLE Repeat just the current title ! CHAPTER Repeat just the current chapter Note...
Section Playing DVD video discs Searching for a desired % Touch r during playback. Each time you touch r, you move ahead one scene, starting playback frame. from a specified time # To return to normal playback, touch f. You can use the search function to search for a desired scene by specifying a title or chapter, Notes and the time search function to specify the...
Section Playing DVD video discs ! With some discs, the icon may be dis ! You can also switch between languages/audio played, indicating that titles, chapters and systems using DVD SETUP MENU. For de time cannot be specified. tails, refer to Setting the audio language on page 85.
Section Playing DVD video discs Changing the viewing angle Touch D. R. C. during playback (Multi-angle) Touch a to turn the dynamic range con- With DVDs featuring multi angle (scenes shot trol on. from multiple angles) recordings, you can # To turn dynamic range control off, touch b. switch among viewing angles during play back.
Section Playing Video CDs Watching a Video CD # With a Video CD featuring the PBC (playback control) function, a menu is displayed. Switch the remote control operation mode to DVD and then press 010 to select the desired menu item. Playback starts from the selected menu item.
Section Playing Video CDs Stopping playback To perform fast forward or reverse, keep touching m or n. % Touch g. If you keep touching m or n for five sec # When you stop Video CD playback (during onds, the icon m or n changes into rever PBC playback only) by touching g, that location sal indication.
Section Playing Video CDs Introduction of advanced Repeating play Video CD operation There are two repeat play ranges for the Video CD playback: TRACK (track repeat) and DISC (disc repeat). ! During PBC playback of Video CDs, this function cannot be operated. Touch A.MENU and FUNCTION and then touch REPEAT.
Section Playing Video CDs Frame-by-frame playback ! With some discs, images may be unclear dur ing slow motion playback. This lets you move ahead one frame at a time ! Reverse slow motion playback is not possi during playback. ble. % Touch r during playback.
Section Playing Video CDs Note Note You can also perform the same operations using You can also perform the same operations using SEARCH. To display SEARCH, touch A.MENU L/R SELECT. To display L/R SELECT, touch and then touch FUNCTION. A.MENU and FUNCTION and then touch NEXT.
Section Playing CDs Listening to a CD Touch the screen to display the touch panel keys. To skip back or forward to another track, touch o or p. Touching p skips to the start of the next track. Touching o once skips to the start of the current track.
Section Playing CDs Introduction of advanced Repeating play CD operation Repeat play lets you hear the same track over again. Touch A.MENU and FUNCTION and then touch REPEAT. Touch either of the following touch panel keys to select the repeat range. ! DISC Repeat the current disc ! TRACK Repeat just the current track Notes...
Section Playing CDs Touch a to turn scan play on. Play the CD that you want to enter a The first 10 seconds of each track is played. title for. When you find the desired track touch Touch A.MENU and FUNCTION and then b to turn scan play off.
Section Playing CDs Scrolling titles in the display Touch OK to store the entered title in memory. This unit can display the first 20 letters only of # You can also store the entered title in memory DiscTitle, DiscArtist, TrackTitle and by moving the cursor to right until it disappears.
Section Playing MP3 Listening to MP3 # If no disc is loaded in the unit, you cannot se lect DVD (DVD player). Insert a disc in the unit. (Refer to page 21.) Touch the screen to display the touch panel keys. To skip back or forward to another track, touch o or p.
Section Playing MP3 Introduction of advanced Notes MP3 operation ! When playing discs with MP3 files and audio data (CD DA) such as CD EXTRA and MIXED MODE CDs, both types can be played only by switching mode between MP3 and CD DA by touching DA<>MP3 or pressing BAND/ESC.
Section Playing MP3 Repeating play Touch a to turn random play on. Tracks will play in a random order within the For MP3 playback, there are three repeat play previously selected FOLDER or DISC ranges. ranges: FOLDER (folder repeat), TRACK (one # To turn random play off, touch b.
Section Playing MP3 % Keep touching DISP until the text infor- Note mation begins to scroll to the left. You can also turn pause function on or off using The rest of the text information will appear in PAUSE. To display PAUSE, touch A.MENU and the display.
Section Multi-CD Player Listening to a CD Touch any of 0106 to select a disc you want to listen to. If you want to select a disc located at 7 to 12, touch PREV or NEXT to display 0712. # When 0106 and 0712 are not displayed, you can display them by touching DISP.
Section Multi-CD Player Introduction of advanced player repeat), TRACK REPEAT (one track re peat) and DISC REPEAT (disc repeat). multi-CD player operation Touch A.MENU and FUNCTION and then touch REPEAT. Touch j to select the repeat range. Touch j repeatedly until the desired repeat range appears in the display.
Section Multi-CD Player Using ITS playlists # To turn random play off, touch b. ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi CD player magazine. After you have Scanning CDs and tracks added your favorite tracks to the playlist you While you are using DISC REPEAT, the begin can turn on ITS play and play just those selec...
Section Multi-CD Player Playback from your ITS playlist Touch b to erase the track from your ITS playlist. ITS play lets you listen to the tracks that you The currently playing selection is erased from have entered into your ITS playlist. When you your ITS playlist and playback of the next track turn on ITS play, tracks from your ITS playlist from your ITS playlist begins.
Section Multi-CD Player Using disc title functions symbols in 1 2 3 ... | } ¯ order. Each time you touch b it will display a letter in the reverse You can input CD titles and display the titles. order, such as Z Y X ... C B A. Then you can easily search for and play a de sired disc.
Section Multi-CD Player Displaying disc titles longer than 20 letters, you can scroll the text to the left so that the rest of the title can be You can display the title of any disc that has seen. had a disc title entered. % Keep touching DISP until the title be- % Touch DISP.
Section Multi-CD Player Touch A.MENU and FUNCTION and then touch COMPRESSION. # If the multi CD player does not support COMP/DBE, NO COMPRESSION is displayed when you attempt to select it. Touch ab to select your favorite set- ting. Touch ab repeatedly to switch between the following settings: OFFCOMP1COMP2OFFDBE1 DBE2...
Section XM tuner Listening to the XM 5 XM channel select setting indicator Shows what channel select setting has been selected. CH·Number is displayed when CH NUMBER is selected, and Category is displayed when CATEGORY is selected. 6 XM channel name Shows the channel name of broadcast channel.
Section XM tuner Introduction of advanced Storing and recalling XM tuner operation broadcast stations If you touch any of the preset tuning keys P1P6 you can easily store up to six broad cast stations for later recall with the touch of a key.
Section XM tuner % Touch MODE to select the desired chan- While the input number is displayed, nel select setting. touch ENTER. Touch MODE repeatedly to switch between The entered XM channel is selected. the following channel select settings: CH NUMBER (channel number select setting) Note CATEGORY (channel category select You can also perform the same operations using...
Section TV tuner Watching the television Touch BAND to select a band. Touch BAND repeatedly until the desired band is displayed, TV1 or TV2. To perform manual tuning, briefly touch c or d. The channels move up or down step by step. # You can also perform manual tuning by mov ing the joystick left or right.
Section TV tuner Introduction of advanced % When you find a station that you want to store in memory, keep touching one of TV tuner operation preset tuning keys P 1P12 until the pre- set number stops flashing. The number you have touched will flash in the preset number indicator and then remain lit.
Section TV tuner Note Storing broadcast stations with BSSM may re place broadcast stations you have saved using P 1P12. Confirming current channel and other settings When watching a TV on the rear display, you can display the reception information such as the channel, band and preset channel list.
Section DVD Player Playing a disc 5 Play time indicator Shows the elapsed playing time of the cur rent chapter/track. 6 Disc list display Shows the list of the disc type or the disc title when using a multi DVD player. 7 Repeat indicator Shows the selected repeat range.
Section DVD Player Turning the DVD player on Introduction of advanced or off DVD player operation ! Only the remote control can operate this function. To perform this function, switch the remote control operation mode to DVD. (Refer to page 18.) % Press REAR.S to turn the DVD player # To turn the DVD player off, press REAR.S again.
Section DVD Player Scanning tracks of a CD Touch j to select the repeat range. During DVD video playback ! You can operate this function only during ! DISC REPEAT Repeat the current disc CD playback. ! CHAPTER REPEAT Repeat just the current chapter Touch A.MENU and FUNCTION and then ! TITLE REPEAT Repeat just the current title...
Section Audio Adjustments Introduction of audio Operating the audio menu adjustments By carrying out the following settings/adjust ments in the order shown, you can create a fi nely tuned sound field effortlessly. 1 Using the position selector 2 Selecting a cut-off frequency 3 Auto TA and EQ (auto-time alignment and auto- equalizing) 1 Audio display...
Section Audio Adjustments ! The center speaker largely determines the # You can select a center frequency from sound image and getting the balance right among 20 frequencies for each band. You can isnt easy. We recommend reproducing a 2 change the center frequency in 1/3 octave steps, ch.
Section Audio Adjustments Using the position selector Touch A.MENU and AUDIO and then touch FADER/BALANCE. One way to assure a more natural sound is to accurately position the stereo image, putting Touch a or b to adjust front/rear you right in the center of the sound field. The speaker balance.
Section Audio Adjustments +8dB 8dB is displayed as the source vo Touch A.MENU and AUDIO and then lume is increased or decreased. touch Dolby PL II. Touch any of the following touch panel Notes keys to select the desired mode. ! The AM tuner volume level can also be ad ! MOVIE The Movie mode suitable for justed with source level adjustments.
Section Audio Adjustments Touch PANORAMA and then touch d to Touch SP SET. turn the Panorama control on. Touch the speaker to be adjusted. # To turn the Panorama control off, touch c. Touch DIMENSION and then touch c or Touch a or b to select the correct size d to adjust front/surround speaker bal- for the selected speaker.
Section Audio Adjustments Selecting a cut-off frequency Touch SP LEVEL. You can select a frequency, under which Touch the speaker to be adjusted. sounds are reproduced through the subwoo # You cannot select speakers whose size is set fer. If the installed speakers include one whose at OFF.
Section Audio Adjustments Touch a or b to adjust the speaker out- ! OFF Turn the time alignment off put level. ! ADJUSTMENT Adjust the time alignment Each time you touch a or b it increases or de as desired creases the speaker output level.
Section Audio Adjustments Auto TA and EQ (auto-time Before operating the auto TA and EQ function alignment and auto- ! Carry out auto TA and EQ in as quiet a equalizing) place as possible, with the car engine and The auto time alignment is automatically ad air conditioning switched off.
Section Audio Adjustments ! Auto TA and EQ changes the audio settings conditioner or heater may prevent correct auto as below: TA and EQ. The fader/balance settings return to the # Press SOURCE to turn the source on if this center position.
Section Audio Adjustments # To cancel auto TA and EQ part way through, touch BACK or ESC. 10 When auto TA and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed.
Section Setting up the DVD player Introduction of DVD setup Note adjustments If you do not operate the DVD setup function within about 30 seconds, the display is automati cally returned to the playback display. Setting the subtitle language You can set a desired subtitle language. If the selected subtitle language is recorded on the DVD, subtitles are displayed in that language.
Section Setting up the DVD player When you select OTHERS ! Even if you use AUDIO to switch the audio language, this does not affect the settings When you select OTHERS, a language code here. input display is shown. Refer to Language code chart for DVD on page 105 to input the four digit code of the desired language.
Section Setting up the DVD player Touch ASSIST SUB TITLE. ! PANSCAN The picture is cut short at the right and left of the screen Touch a to turn assist subtitles on. # To turn assist subtitles off, touch b. Notes ! When playing discs that do not specify PANSCAN, playback is with LETTER BOX...
DVD, changing the remote control code # If you input an incorrect code number, the type enables you to operate the Pioneer DVD icon is displayed. Touch C and input the cor player with the supplied remote control. There rect code number.
Section Setting up the DVD player Set the remote control selection switch on the left side of the remote control to the appropriate position with a pen tip or other pointed instrument . ! If you select AVH mode, there is no need to take the following procedure.
Section Initial Settings Adjusting initial settings ignition, a warning tone will sound. You can turn off the warning tone. Touch A.MENU and INITIAL and then touch DETACH WARNING. Touch a to turn warning tone on. # To turn warning tone off, touch b. Switching the auxiliary setting It is possible to use auxiliary equipment with Initial settings lets you perform initial setup of...
! When a call is made or received using a # To turn automatic disc playback off, touch cellular telephone connected to this unit. ! When the voice guidance is output from a Pioneer navigation unit connected to this unit. Switching the dimmer setting for sub-display Touch A.MENU and INITIAL and then...
When there is a navigation guidance, you can mix the guidance voice/beep sound from a Pioneer navigation unit with the audio sound from this system. You can select either mixing both the guidance voice and the beep sound or the guidance voice only.
# You can also display MENU by clicking the CAUTION joystick. Pioneer recommends the use of a camera # To go to the next group of function names, which outputs mirror reversed images, other- touch NEXT.
Section Other Functions Touch A.MENU and SETUP and then touch BACK UP CAMERA. Touch a to turn rear view camera set- ting on. # To turn rear view camera setting off, touch b. Touch c or d to select an appropriate setting for polarity.
Section Other Functions ! If vehicles parking brake is not engaged, MOVIE1 and MOVIE2 will be changed into still pictures. Using the PGM button You can operate the preprogrammed functions for each source by using PGM. % Press PGM to turn pause on when se- lecting the following sources: ! DVD Built in DVD player ! S-DVD DVD player/multi DVD player...
Appendix Additional Information Troubleshooting Common Symptom Cause Action (See) Power doesnt turn on. Leads and connectors are incor Confirm once more that all connections are The unit doesnt operate. rectly connected. correct. The fuse is blown. Rectify the reason for the fuse blowing, then replace the fuse.
Appendix Additional Information Symptom Cause Action (See) The icon is displayed, and op The operation is prohibited for the This operation is not possible. eration is not possible. disc. The operation is not compatible This operation is not possible. with the discs organization. The picture stops (pauses) and Reading of data has become impos After pressing g once, start playback once...
Repeat play and track/time PBC is turned on. Turn PBC off. (Page 44, Page 48) search are not possible. Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message. Message Cause Action (See)
Appendix Additional Information Understanding auto TA and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem.
Appendix Additional Information DVD player and care DVD discs ! Use only normal, round discs. If you insert ! With some DVD video discs, it may not be irregular, non round, shaped discs they possible to use certain functions. may jam in the DVD player or not play prop ! It may not be possible to play back some erly.
Appendix Additional Information ! Playback of discs recorded on a personal ! When playing discs with MP3 files and computer may not be possible, depending audio data (CD DA) such as CD EXTRA and on the application settings and the environ MIXED MODE CDs, both types can be ment.
! If liquid or foreign matter should get inside this unit, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Service Station. Do not use the unit in this condition because doing so may result in a fire, electric shock, or other failure.
PIONEER Service Station. span of the small fluorescent tube used in side the display may be shortened. ! Small black dots or white dots (bright dots) may appear on the LCD screen.
Appendix Additional Information Terms music mode is also available for 2 channel sources in addition to the movie mode. Aspect ratio This is the width to height ratio of a TV screen. A regular display has an aspect ratio of 4:3. This stands for Digital Theater Systems.
Appendix Additional Information Level 2: feature scenes shot from multiple angles, let The file name can have up to 31 characters (in ting you choose your viewing angle as desired. cluding the separation mark . and a file ex tension). Each folder contains less than 8 Multi-audio (Multilingual dialog) hierarchies.
Appendix Additional Information Playback control (PBC) This is a playback control signal recorded on Video CDs (Version 2.0). Using menu displays provided by Video CDs with PBC lets you enjoy playback of simple interactive software and software with search functions. You can also enjoy viewing high and standard resolution still images.
Appendix Additional Information Specifications Decoder ........Linear PCM/Dolby Digital/ Dolby Pro Logic II/DTS General Subwoofer: Crossover frequency ..63/80/100/125/160/200 Hz Power source ......14.4 V DC (10.8 15.1 V al Level ........±10dB (1 dB/step) lowable) Speaker setting: Grounding system ....Negative type Time alignment ....
Appendix Additional Information Usable sensitivity ..... 8 dBf (0.7 µV/75 W, mono, S/N: 30 dB) 50 dB quieting sensitivity ..10 dBf (0.9 µV/75 W, mono) Signal to noise ratio ....75 dB (IHF A network) Distortion ........0.3 % (at 65 dBf, 1 kHz, stereo) 0.1 % (at 65 dBf, 1 kHz, mono)
Index PBC (playback control) ........44 Playback control (PBC) ........108 Angle icon ..........36,.43,.86 Aspect ratio ..........86,.106 Audio language ........36,.42,.85 Region number .........9,.108 Bonus group ..........106 Brightness ............25 Slideshow ............108 Browsable pictures ........106 Subtitle language ........36,.42,.84 Chapter ............106 Title ..............108 Code number ...........86 TV aspect ............86 Color ..............25 Condition memory ..........12...