Setting For Skipping Unwanted Channels; Checking Signal Strength - Pioneer PDP-4340HD Operating Instructions Manual

Basic Adjustment Settings

Setting for skipping unwanted channels

From among digital TV channels searched and set up
using Auto Channel Preset, you can select channels to
be skipped when CH +/– are operated.
1
Press HOME MENU.
2
Press / to select "DTV Setup", and then press
ENTER.
3
Press / to select "DTV Channel Setup", and
then press ENTER.
4
Press / to select "Channel Add/Del", and then
press ENTER.
5
Press / to select "Channel".
6
Press / to select a channel to be skipped.
7
Press / to select "Add/Delete".
8
Press / to select "Delete".
9
Press HOME MENU to exit the menu.
• To restore skipped channels, use the above procedure
except that you select "Add" in step 8.
PDP5040HD-Eng (40-55) 45

Checking signal strength

When watching a digital TV program, you can check its
current signal strength.
1
Press HOME MENU.
2
Press / to select "DTV Setup", and then press
ENTER.
3
Press / to select "DTV Channel Setup", and
then press ENTER.
4
Press / to select "Signal Strength", and then
press ENTER.
• Adjust the direction of the antenna so that the
current signal strength reaches as close to the
maximum signal strength as possible.
5
Press HOME MENU to exit the menu.
7/24/03, 1:59 PM
09
45
En