Table of Contents
Advertisement
1
8.1.3 OPERATION OF SERVICE FACTORY MODE
Functions whose setting are set to OFF.
A
The settings for the following functions are set to OFF when Service Factory mode is entered
(Including when the "FAY" command is received) :
No.
1
2
3
4
5
6
7
8
B
Note) Enter the factory after canceling ACI because the ACI operation setting OFF and not done.
User data
User data will be treated as follows :
• User data on picture- and audio-quality adjustments are not reflected, and factory-preset data are
output (user data will be retained in memory). When the unit enters Service Factory mode, the
current audio-quality adjustment data will be still be retained in memory.
• As to data on various settings, user data will be applied to the items that are associated with signal
format change (screenize switching, etc).
• Data on screen (i.e.,screen position; meaning clock dividers, and not including data on screen size)
Are reset to the default values (data stored in memory will be retained). Screen size will be retained.
C
D
E
F
136
1
2
Function
Two screen operation
FREEZE
Mask control
ORBITER
Detection of the TRAP switch
TRAP history
Display of TV guide
Setting of Parental Control
PDP-6071PU
2
3
Remarks
Input function set on the main side is selected.
MTB/MB is none. It becomes processing on the PANEL side.
Central value operation.
The detection operation is stopped.
To a possible turning on though the memory is maintained.
When this is turned off, the block of the screen is released.
3
4
4
Advertisement
Table of Contents
