HP 1150NR - Mini - Atom 1.6 GHz Maintenance And Service Manual page 78

Removal and replacement procedures
13. If it is necessary to replace the wireless antenna transceivers and cables:
a. Remove the two Phillips PM2.0×3.0 screws 1 that secure the wireless antenna transceivers to the
display enclosure.
b. Release the wireless antenna cables from the routing channel 2 built into the right side of the display
enclosure.
c. Remove the wireless antenna transceivers and cables 3. The wireless antenna transceivers and cables are
available using spare part number 576814-001.
Reverse this procedure to reassemble and install the display assembly.
4–40 Maintenance and Service Guide