9. If it is necessary to replace the display panel:
a. Remove the four Phillips PM2.0×4.0 screws 1 that secure the display panel to the display enclosure.
b. Release the display panel cable 2 from the clips and routing channel built into the display enclosure.
c. Remove the display panel 3. The display panel is available using the following spare part numbers:
◆
591327-001—For use only with the 15.6-in, WVA, AntiGlare LED display assembly
◆
576801-001—For use only with the 15.6-in, WVA, BrightView LED display assembly
◆
576800-001—For use only with the 15.6-in, SVA, BrightView LED display assembly
Maintenance and Service Guide
Removal and replacement procedures
4–37