Removal and replacement procedures
The top cover spare part kit includes a TouchPad board, TouchPad bracket, and TouchPad cable.
Top cover with bronze finish for use in all countries and regions except Brazil and the
Top cover with bronze finish for use only in Brazil
Top cover with bronze finish for use only in the United Kingdom
Top cover with black finish for use in all countries and regions except the United Kingdom
Top cover with black finish for use only in the United Kingdom
Before removing the top cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module compartment cover (see
Remove the top cover:
1. Remove the four rubber feet 1 and the eight Phillips PM2.0×12.0 screws 2 that secure the top cover to
the base enclosure.
"Battery" on page
"Expansion memory module" on page
Spare part number
Maintenance and Service Guide