Download Print this page

HP 1150NR - Mini - Atom 1.6 GHz Maintenance And Service Manual: Processor Fan/heat Sink Assembly

Hp envy 15 - maintenance and service guide.
Hide thumbs

Advertisement

Removal and replacement procedures

Processor fan/heat sink assembly

Description
Processor fan/heat sink assembly (includes replacement thermal material)
Before removing the processor fan/heat sink assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the memory module compartment cover (see
6. Remove the top cover (see
Remove the processor fan/heat sink assembly:
1. Disconnect the fan cable 1 from the system board.
2. Following the 1, 2, 3, 4 sequence stamped into the processor fan/heat sink assembly, loosen the four Phillips
PM2.0×6.0 captive screws 2 that secure the processor fan/heat sink assembly to the system board.
3. Remove the Phillips PM2.0×3.0 screw 3 that secures the processor fan/heat sink assembly to the system board.
4. Remove the processor fan/heat sink assembly 4.
Due to the adhesive quality of the thermal material located between the processor fan/heat sink assembly
and system board components, it may be necessary to move the processor fan/heat sink assembly from
side to side to detach it.
4–22
"Battery" on page
4-7).
"Top cover" on page
4-10).
"Expansion memory module" on page
Spare part number
576837-001
4-8).
Maintenance and Service Guide

Advertisement

   Also See for HP 1150NR - Mini - Atom 1.6 GHz

   Related Manuals for HP 1150NR - Mini - Atom 1.6 GHz

Comments to this Manuals

Symbols: 0
Latest comments: