Application Software
4.1.2
Setting the user authentication method
Reminder
To change the user authentication method from "Device authentication" to "Network server authenti-
cation," it is necessary first to register the domain name of Active Directory on the machine side.
If "Network server authentication" is selected, "Active Directory" must invariably be selected.
<From the PC>
0
For the procedure to access the machine, see steps 1 through 5 of
Data Administrator" on page
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data
Administrator.
2
Click the [Authentication settings].
3
Click the [User authentication].
501/421/361
4-2.
"Gaining access from PageScope
4
4-5