Setting Pc-Fax Receiving; Setting Pc-Fax Receive; From The Control Panel - Konica Minolta bizhub 361 Security Manual

Administrator Operations
2.24

Setting PC-FAX receiving

You can set whether or not to use PC-FAX receive function when the optional hard disk is mounted.
2.24.1

Setting PC-FAX receive

<From the Control Panel>
When the function to be used, set the following contents.
Item
Receiving User Box Destination
Print
Password Check
!
Detail
When Dial-in is set ON, [Dial-in only] is appeared after [Allow]. PC-FAX receiving setting cam be made
only when the data is received with dial-in number.
FAX input data is saved to the box as TIFF.
When a user [Specified User Box] set at when data is sent out, the received data will be saved at print
or forced memory inbox according to the conditions set for FAX receiving. Also when a new box is
assigned with the same box number after [Specified User Box] is deleted, the data will be saved at the
newly assigned inbox, Therefore you should be careful with the number assigned.
501/421/361
Explanation
Received data is output or input to forced memory inbox or specified box. [Spec-
ified User Box] is selected, the data is stored at the box whose number is assigned
with F code Sub address.
It is set whether or not to print after receiving data.
It can set password check/communication password (within 8 digits).
2
2-114